Is there a pin-compatible replacement for INA180A1IDBVR?

No pin-compatible replacement was identified. The key challenge is matching the specialized function of a current sense amplifier, particularly its high common-mode voltage capability, which general op-amps lack.

What risks should I check before replacing INA180A1IDBVR?

The main risks are functional and electrical. Verify the replacement's common-mode voltage range, gain accuracy, and offset voltage. Using a general op-amp requires a complete circuit redesign and will not match the target's performance.

INA180A1IDBVR Alternatives, Datasheet & Cross Reference | Texas Instruments

Finding a substitute for the INA180A1IDBVR current sense amplifier requires careful review. While no direct drop-in replacements are common, functional alternatives may exist if circuit redesign is possible.

AI replacement insight

Electrical riskhigh

Functional mismatch; candidate cannot handle the target's common-mode voltage.

Firmware riskhigh

A new circuit design will change the transfer function, likely requiring firmware changes.

Can it be replaced directly?

No, there is no direct, pin-compatible replacement for the INA180A1IDBVR among the reviewed candidates. The target is a specialized current sense amplifier.

Best replacement path

Search for other dedicated current sense amplifiers with similar gain (20 V/V), common-mode voltage range (up to 26V), and SOT-23-5 package.

Main risk

The primary risk is functional mismatch; replacing a dedicated current sense amplifier with a general-purpose op-amp requires a new circuit design and validation.

Recommended alternatives

A functional alternative that requires circuit redesign as it is a general op-amp, not a dedicated current sense amplifier.

View details

Alternative comparison matrix

Feature / factor	INA180A1IDBVR	TP5591-TR	Compatibility / risk
Function	Current Sense Amp	Op-Amp	Op-Amp — Target is a dedicated Current Sense Amplifier. Requires circuit redesign.
Package	SOT-23-5	SOT-23-5	SOT-23-5 — Package matches, but pinout must be verified for new circuit.
Voltage	2.7V - 5.5V	1.8V - 5.5V	1.8V - 5.5V — Candidate supply voltage range covers target's range.
Offset Voltage	150µV	20µV	20µV — Candidate has lower offset voltage, which is beneficial.
Common Mode Voltage	-0.2V to +26V	Limited by Vsupply	Limited by Vsupply — Candidate cannot match target's high common-mode range.

Application & sourcing insights

Questions & answers

The best alternative would be another current sense amplifier with a 20V/V gain, support for a common-mode voltage up to 26V, and a SOT-23-5 package. General-purpose op-amps are not direct substitutes.