Is there a pin-compatible replacement for IR2110STRPBF?

No fully pin-compatible, electrically equivalent replacement was found. IR2010STRPBF shares the same package and pinout but has a critically lower high-side voltage rating (200V vs 500V) and is not a safe drop-in replacement for most applications.

What risks should I check before replacing IR2110STRPBF?

Key risks to check are: 1) High-side voltage rating (must be >=500V for many applications). 2) Package and pinout compatibility (16-SOIC). 3) Drive current capability. 4) Propagation delay and timing, which affect switching performance and efficiency.

IR2110STRPBF Alternatives, Datasheet & Cross Reference | Infineon

The IR2110STRPBF is a 500V high- and low-side gate driver for MOSFETs and IGBTs. Finding a replacement requires matching its half-bridge configuration, 10-20V supply, 2A drive current, and 16-SOIC package.

AI replacement insight

Electrical riskhigh

Candidates have significantly different high-side voltage ratings or timing.

Package riskhigh

No drop-in compatible package and pinout was found among functional equivalents.

Can it be replaced directly?

No direct pin-compatible replacement for the IR2110STRPBF was identified. Candidates have critical electrical differences or incompatible packages, requiring careful engineering review.

Best replacement path

For new designs, DGD21904MS14-13 is a functional alternative with superior ratings but requires a new PCB layout. No direct drop-in replacement was found for existing boards.

Main risk

The primary risks are mismatched high-side voltage ratings and package incompatibility, which necessitates careful datasheet review and likely a board redesign.

Recommended alternatives

A strong functional alternative with superior electrical ratings, but requires a new PCB layout due to a different package.

View details

Alternative comparison matrix

Feature / factor	IR2110STRPBF	DGD21904MS14-13	IR2010STRPBF	Compatibility / risk
Package	16-SOIC	SO-14	16-SOIC	SO-14 / 16-SOIC — Different package requires board redesign.; IR2010STRPBF: Package matches.
Pinout	16	14	-	14 — Different pin count requires board redesign.
Voltage	500V	600V	200V	600V / 200V — Higher high-side voltage rating is an upgrade.; IR2010STRPBF: High-side voltage is a critical downgrade.
Current	2A	4.5A	3 A	4.5A / 3 A — Higher peak output current is an upgrade.; IR2010STRPBF: Higher peak output current.
Temperature	-40°C ~ 125°C	-40°C to +125°C	-	-40°C to +125°C — Operating temperature range matches.

Application & sourcing insights

Questions & answers

For new designs, DGD21904MS14-13 is a strong functional alternative with better specs but requires a different PCB layout. For existing boards, IR2010STRPBF is pin-compatible but has a much lower 200V rating, making it a risky downgrade.