Is there a pin-compatible replacement for JBLH2101M100E150RLM 100UF 100V?

Currently, no pin-to-pin compatible replacements have been verified. While other through-hole capacitors exist, they often differ in critical parameters like ripple current, ESR, or physical dimensions, requiring careful engineering review.

What risks should I check before replacing JBLH2101M100E150RLM 100UF 100V?

Key risks include package mismatch (SMD vs. through-hole), lower ripple current or higher ESR causing overheating, and different physical dimensions preventing proper board fit. Always verify these parameters from the datasheet.

JBLH2101M100E150RLM 100UF 100V Alternatives, Datasheet & Cross Reference | DMBJ

The DMBJ JBLH2101M100E150RLM is a 100µF 100V through-hole aluminum electrolytic capacitor with low ESR. Finding a replacement requires matching capacitance, voltage, physical size, and ripple current rating.

AI replacement insight

Electrical riskhigh

Ripple current and ESR are critical and hard to match.

Package riskhigh

Alternatives may be SMD or have different radial can dimensions.

Firmware risklow

Not applicable for a passive component.

Can it be replaced directly?

No, a direct, verified drop-in replacement is not currently available. All reviewed candidates have critical differences in package, ripple current, or voltage rating.

Best replacement path

For new layouts, use SMD functional alternates like the Lelon VZH series. For existing boards, a replacement must match the radial package, dimensions, and meet or exceed the 100V, 1790mA ripple, and 50mΩ ESR ratings.

Main risk

The primary risk is finding a part with a sufficiently high ripple current rating in a matching physical package; many alternatives fail on this critical parameter.

Recommended alternatives

Functional alternative with matching electrical specs, but in an SMD package requiring board redesign.

View details

Alternative comparison matrix

Feature / factor	JBLH2101M100E150RLM 100UF 100V	VEJ101M2ATR-1313	VZH101M2ATR-1313	Compatibility / risk
Package	Radial, Can (Through-Hole)	SMD	Surface Mount	SMD / Surface Mount — Candidate is SMD, target is Through-Hole. Not a drop-in replacement.; VZH101M2ATR-1313: Candidate is SMD, target is Through-Hole. Not a drop-in replacement.
Voltage	100V	100V	100V	100V — matched; VZH101M2ATR-1313: matched
Capacitance	100µF	100µF	100µF	100µF — matched; VZH101M2ATR-1313: matched
Load Life	2000 hours	2000 hours	-	2000 hours — matched
Ripple Current	1790mA	-	Unknown	Unknown — Target is 1790mA. Must be verified from datasheet.
Esr	50mΩ	-	Unknown	Unknown — Target is 50mΩ. Must be verified from datasheet.

Application & sourcing insights

Questions & answers

For new designs, surface-mount capacitors like the Lelon VZH101M2ATR-1313 offer identical electrical specifications (100µF, 100V) but require a different PCB layout. No direct through-hole replacements have been identified that match all key parameters.