What risks should I check before replacing K24?

The main risks are package mismatch, which requires a PCB redesign, and higher forward voltage (Vf), which can increase power loss and heat. Also, check dynamic characteristics like reverse recovery time if used in a high-frequency switching application.

K24 Alternatives, Datasheet & Cross Reference | Daniels Manufacturing Corporation

K24 is a 40V, 2A Schottky rectifier in a compact SOD-123FL package. When searching for a replacement, prioritize candidates with the same package, equal or greater voltage and current ratings, and a comparable forward voltage to manage thermal performance.

AI replacement insight

Electrical risklow

Candidates offer equal or better voltage/current ratings. Higher Vf is a minor risk.

Package riskhigh

Many alternatives are in a different package (SMC), requiring a board redesign.

Sourcing risklow

Schottky diodes are a mature category with many vendors.

Can it be replaced directly?

Direct replacement for K24 should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.

Best replacement path

Use RBR3MM60ATFTR for a near drop-in replacement, or consider SS56C/SK86C for a redesign with higher current capability.

Main risk

Package mismatch is the primary risk, as several functional alternatives require a different PCB footprint, making them unsuitable as drop-in replacements.

Recommended alternatives

A likely pin-compatible upgrade with higher voltage/current ratings in the same SOD-123FL package.

View details

Alternative comparison matrix

Feature / factor	K24	RBR3MM60ATFTR	SK86C	SS56C	Compatibility / risk
Package	SOD-123FL	SOD-123FL	DO-214AB/SMC	DO-214AB (SMC)	SOD-123FL / DO-214AB/SMC / DO-214AB (SMC) — Package matches target, enabling potential drop-in.; SK86C: Package is not compatible and requires a PCB layout change.; SS56C: Package is not compatible and requires a PCB layout change.
Voltage	40V	60V	60V	60V	60V — Higher voltage rating provides increased design margin.; SK86C: Higher voltage rating provides increased design margin.; SS56C: Higher voltage rating provides increased design margin.
Current	2A	3A	8A	5A	3A / 8A / 5A — Higher current rating provides increased design margin.; SK86C: Significantly higher current rating.; SS56C: Significantly higher current rating.
Forward Voltage	0.55V	0.66V	-	-	0.66V — Higher Vf may increase power dissipation. Review thermal impact.
Temperature	-65°C to +150°C	-55°C to +150°C	-	-	-55°C to +150°C — Slightly narrower operating range on the low end.

Application & sourcing insights

Questions & answers

Verified drop-in options for K24 are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.