Is there a pin-compatible replacement for KP223J2J0701?

No, a direct pin-compatible replacement with the same 7.5mm lead pitch was not found in this review. All functional alternatives require mechanical adjustment due to different lead spacing.

What risks should I check before replacing KP223J2J0701?

The main risk is the mechanical fit. The lead pitch of all alternatives is wider than the original part. You must confirm your PCB has enough space to accommodate bent leads without causing shorts or mechanical stress.

KP223J2J0701 Alternatives, Datasheet & Cross Reference | KYET

Finding a substitute for the KYET KP223J2J0701, a 22nF 630V film capacitor, requires careful attention to its 7.5mm lead pitch. While several parts offer matching or better electrical specs, they have different physical dimensions.

AI replacement insight

Package riskhigh

Lead pitch mismatch requires lead bending or PCB modification, which may not be feasible.

Electrical risklow

Several candidates match or exceed key electrical ratings like voltage and temperature.

Sourcing risklow

Alternatives from the same manufacturer (KYET) and others are available.

Can it be replaced directly?

No direct, pin-for-pin replacements were identified. All suitable alternatives require mechanical adaptation due to different lead pitches.

Best replacement path

Use KP223J2J1001, which is electrically identical, and bend the leads to fit the 7.5mm spacing if board layout allows.

Main risk

The primary risk is mechanical incompatibility. All viable candidates have a wider lead pitch (10mm or more) than the target's 7.5mm.

Recommended alternatives

Electrically identical to the target but requires physical adaptation due to a different lead pitch.

View details

Alternative comparison matrix

Feature / factor	KP223J2J0701	KP223J2J1001	MMKP223J3A1001	MPX223K31C2KN15600	Compatibility / risk
Package	Radial, 7.5mm Pitch	Radial, 10mm Lead Pitch	Radial, Box-type, P=10mm	Radial, 10mm Pitch	Radial, 10mm Lead Pitch / Radial, Box-type, P=10mm / Radial, 10mm Pitch — Not a drop-in fit.; MMKP223J3A1001: Not a drop-in fit.; MPX223K31C2KN15600: Not a drop-in fit.
Voltage	630V	630V	1000V	275VAC (630VDC)	630V / 1000V / 275VAC (630VDC) — matched; MMKP223J3A1001: Higher voltage rating provides more margin.; MPX223K31C2KN15600: X2 safety cap, DC rating matches.
Capacitance	22nF	22nF	22nF	-	22nF — matched; MMKP223J3A1001: matched
Tolerance	±5%	±5%	-	±10%	±5% / ±10% — matched; MPX223K31C2KN15600: Wider tolerance may affect circuit precision.
Temperature	-40°C to +100°C	-40°C to +100°C	-40°C to +105°C	-40°C to +110°C	-40°C to +100°C / -40°C to +105°C / -40°C to +110°C — matched; MMKP223J3A1001: Slightly wider range.; MPX223K31C2KN15600: Wider operating range.

Application & sourcing insights

Questions & answers

The best alternative is KP223J2J1001. It is electrically identical but has a 10mm lead pitch instead of 7.5mm, so you must verify it can be physically installed on your board.