Is there a pin-compatible replacement for LBAT46T1G?

No pin-compatible replacements were identified in this review. All suitable electrical alternatives found are in a different package (SOD-123FL) and are not drop-in replacements.

What risks should I check before replacing LBAT46T1G?

The primary risk is mechanical incompatibility. Verify that your PCB layout can accommodate the SOD-123FL package. Also, review the candidate's higher current rating and its effect on circuit performance, such as junction capacitance.

LBAT46T1G Alternatives, Datasheet & Cross Reference | LRC

Find functional alternatives for the LBAT46T1G, a 100V, 150mA Schottky diode in a SOD123 package. Review key parametric differences and package compatibility before selection.

AI replacement insight

Package riskhigh

Alternatives are in SOD-123FL, not SOD123, requiring PCB redesign.

Electrical risklow

Electrical ratings of alternatives are equal or better than the target.

Can it be replaced directly?

No direct, drop-in replacement for the LBAT46T1G has been identified. All suitable candidates require layout changes due to package differences.

Best replacement path

Functional alternatives like DSS210 exist but require a board redesign due to package differences from SOD123 to SOD-123FL.

Main risk

Package incompatibility is the main risk; the SOD-123FL footprint of alternatives differs from the target's SOD123.

Recommended alternatives

A functional alternative with higher current rating (2A), but in a different package (SOD-123FL) that requires layout changes.

View details

Alternative comparison matrix

Feature / factor	LBAT46T1G	DSS210	LMBR1100FT1G	Compatibility / risk
Package	SOD123	SOD-123FL	-	SOD123-FL — Requires PCB layout change.
Polarity Or Type	Schottky	Schottky	-	Schottky — Both are Schottky diodes.
Voltage V	100.0V	100.0V	-	100V — Voltage rating matches target.
Current A	0.15A	2.0A	-	1.0A — Higher current rating.

Application & sourcing insights

Questions & answers

DSS210 and LMBR1100FT1G are functional alternatives with similar or better electrical ratings. However, they use a SOD-123FL package, which requires a different PCB layout than the target's SOD123 package.