Pricing

Best Alternatives to LESD8LH5.0CT5G

Package: SOD882LRCTVS DiodesType: Bi-DirectionalStand-off Voltage: 5 VCapacitance: 3 pFClamping Voltage: 11.5 VPeak Pulse Power: 40 W

Finding a substitute for the LESD8LH5.0CT5G TVS diode requires matching its bi-directional polarity, 5V standoff voltage, and low 3pF capacitance. Alternatives exist but often involve trade-offs in power rating or clamping voltage.

AI replacement insight

Electrical riskhigh

Key parameters like clamping voltage and power rating vary significantly.

Package risklow

All viable candidates share the same SOD882 package.

Firmware risklow

This is a passive component with no firmware dependency.

Can it be replaced directly?

No, a direct 1-to-1 replacement for LESD8LH5.0CT5G with identical key parameters was not found. All candidates require a trade-off analysis.

Best replacement path

No direct drop-in found. Evaluate LESD8LVL5.0CT5G if the circuit tolerates a higher clamping voltage, or SP3022-01ETG if the expected surge is well below the target's 40W rating.

Main risk

The main risk is electrical mismatch. Candidates have critical differences in clamping voltage, power rating, or standoff voltage that could compromise circuit protection.

Recommended alternatives

3
LESD8LVL5.0CT5G package
Needs validationhigh risk

Form-fit alternate with higher power and lower capacitance, but higher clamping voltage requires review.

View details

Alternative comparison matrix

Feature / factorLESD8LH5.0CT5GLESD8LVL5.0CT5GSP3522-01ETGSP3022-01ETGCompatibility / risk
PackageSOD882SOD882SOD882SOD882SOD882 — Package matches.; SP3522-01ETG: Package matches.; SP3022-01ETG: Package matches.
Polarity Or TypeBi-DirectionalBi-directionalBi-Directional (from datasheet)BidirectionalBi-directional / Bi-Directional (from datasheet) / Bidirectional — Polarity matches target.; SP3522-01ETG: Polarity matches target.; SP3022-01ETG: Polarity matches target.
Voltage V5.0V5.0V7.0V5.3V5.0V / 7.0V / 5.3V — Standoff voltage is a perfect match.; SP3522-01ETG: Higher standoff voltage may offer less protection for 5V rails.; SP3022-01ETG: Standoff voltage is a close match.
Power W40W50WNot specified20W50W / Not specified / 20W — Higher peak power is an upgrade.; SP3522-01ETG: Peak power rating is missing, requires datasheet review.; SP3022-01ETG: Peak power is 50% lower than target, a significant downgrade.
Clamping Voltage11.5V19V--19V — Clamping voltage is much higher, offering less protection.
Capacitance3pF0.25pF0.15pF0.35pF0.25pF / 0.15pF / 0.35pF — Lower capacitance is an upgrade.; SP3522-01ETG: Significantly lower capacitance is an upgrade for high-speed lines.; SP3022-01ETG: Lower capacitance is an upgrade.

Application & sourcing insights

Questions & answers

There is no single best drop-in replacement. Candidates like LESD8LVL5.0CT5G offer better power and capacitance but have a higher clamping voltage, while SP3022-01ETG has lower capacitance but a significantly lower power rating. Each requires engineering review.