What risks should I check before replacing LMSZ5250BT1G?

Before replacing LMSZ5250BT1G, first verify the Zener voltage (Vz) is 20V. Second, ensure the power dissipation is at least 500mW. Finally, check that secondary parameters like Zener impedance (ZZT) and reverse leakage current are within your application's limits.

LMSZ5250BT1G Alternatives, Datasheet & Cross Reference | LRC

Finding a substitute for the LMSZ5250BT1G Zener diode involves matching its 20V regulation voltage, 500mW power rating, and SOD-123 package. This analysis identifies strong cross-vendor alternatives and highlights key parametric differences to consider.

AI replacement insight

Electrical risklow

When using MMSZ5250BT1G, electrical risk is low. Using parts like LMSZ5248BT1G (18V) introduces voltage mismatch risk.

Package risklow

All viable candidates use the same SOD-123 package, minimizing physical layout risk.

Can it be replaced directly?

Direct replacement for LMSZ5250BT1G should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.

Best replacement path

MMSZ5250BT1G from onsemi is the best replacement path, offering identical key electrical parameters and package.

Main risk

The main risk is using a substitute with a different Zener voltage, which will alter the circuit's voltage regulation point.

Recommended alternatives

MMSZ5250BT1G by onsemi is a strong alternative with matching Zener voltage (20V), power (500mW), and SOD-123 package.

View details

Alternative comparison matrix

Feature / factor	LMSZ5250BT1G	MMSZ5250BT1G	LMSZ5248BT1G	Compatibility / risk
Package	SOD-123	SOD-123	SOD-123	SOD-123 — Package matches, enabling form-fit compatibility.; LMSZ5248BT1G: Package matches, enabling form-fit compatibility.
Voltage	20V	20V	18V	20V / 18V — Nominal Zener voltage is identical.; LMSZ5248BT1G: Zener voltage is 10% lower, requires circuit validation.
Power	500mW	500mW	500mW	500mW — Power dissipation rating is identical.; LMSZ5248BT1G: Power dissipation rating is identical.
Tolerance	±5%	±5%	-	±5% — Voltage tolerance matches.
Manufacturer	LRC	onsemi	-	onsemi — Cross-vendor alternative from a major manufacturer.
Current	6.2mA	-	7.0mA	7.0mA — Test current is slightly different.

Application & sourcing insights

Questions & answers

Verified drop-in options for LMSZ5250BT1G are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.