
Murata Electronics
A 0402 inductor with higher current rating but lower inductance (6.2nH vs 6.8nH).
The Murata LQW15AN6N8G80D is a high-frequency 6.8nH wirewound inductor in a 0402 package, rated for 1.45A. Finding a replacement requires matching inductance, current rating, and low DCR for RF and power applications.
Inductance mismatch or current downgrade requires careful validation.
All viable candidates share the same 0402 package.
Alternatives are from the same manufacturer but may have different stock levels.
No direct, one-to-one replacement was found. All candidates have parametric differences in inductance or significantly lower current ratings.
Parametric alternatives with different inductance values, such as LQW15AN6N2B80D (6.2nH) or LQW15AN8N2G80D (8.2nH), are the most viable paths but require circuit validation.
The main risk is mismatch in inductance, which can detune RF circuits or alter filter characteristics. A secondary risk is using a part with a lower current rating, which can lead to component failure.

Murata Electronics
A 0402 inductor with higher current rating but lower inductance (6.2nH vs 6.8nH).
| Feature / factor | LQW15AN6N8G80D | LQW15AN6N2B80D | LQW15AN6N8H00D | LQW15AN8N2G80D | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 0402 (1005 metric) | 0402 (1005 metric) | 0402 (1005 metric) | 0402 (1005 metric) | 0402 (1005 metric) — Same package and pin count.; LQW15AN6N8H00D: Same package and pin count.; LQW15AN8N2G80D: Same package and pin count. |
| Inductance | 6.8 nH | 6.2 nH | 6.8 nH | 8.2 nH | 6.2 nH / 6.8 nH / 8.2 nH — Inductance is lower than target.; LQW15AN6N8H00D: Inductance matches, but tolerance is wider (±3% vs ±2%).; LQW15AN8N2G80D: Inductance is higher than target. |
| Current | 1.45 A | 1.6 A | 0.7 A | 1.5 A | 1.6 A / 0.7 A / 1.5 A — Higher current rating provides more margin.; LQW15AN6N8H00D: Current rating is less than half of the target's.; LQW15AN8N2G80D: Slightly higher current rating. |
| Dcr | 0.068 Ohm | 0.056 Ohm | 0.09 Ohm | 0.069 Ohm | 0.056 Ohm / 0.09 Ohm / 0.069 Ohm — Lower DCR reduces power loss.; LQW15AN6N8H00D: Higher DCR increases power loss.; LQW15AN8N2G80D: DCR is negligibly higher. |
There are no direct drop-in replacements. Alternatives like LQW15AN6N2B80D or LQW15AN8N2G80D offer similar performance but have different inductance values (6.2nH or 8.2nH), requiring engineering review.