
Murata Manufacturing Co., Ltd.
Strong functional alternate with very close inductance and better current rating.
Finding a substitute for the Murata LQW18AN20NG00D, a 20nH high-frequency inductor, requires careful matching of its 0603 package, inductance, and high Self-Resonant Frequency (SRF). While several alternatives exist, they often involve trade-offs in SRF or tolerance that need review.
Key parameters like inductance, SRF, and tolerance differ and require circuit validation.
Candidates share the same 0603 package, ensuring physical compatibility.
No verified direct drop-in replacement is available. However, LQW18AN22NJ10D is a strong candidate from the same Murata series that requires engineering review, primarily for its lower Self-Resonant Frequency.
LQW18AN22NJ10D is the most promising functional alternative due to its very similar inductance and improved current rating, but its lower SRF must be evaluated for the specific application.
The primary risk is a mismatch in Self-Resonant Frequency (SRF), which could degrade performance in high-frequency RF circuits operating near the target's 4.9GHz SRF.

Murata Manufacturing Co., Ltd.
Strong functional alternate with very close inductance and better current rating.
| Feature / factor | LQW18AN20NG00D | LQW18AN22NJ10D | LQW18AN15NG80D | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 0603 (1608 metric) | 0603 (1608 metric) | 0603 (1608 metric) | 0603 (1608 metric) — Same package and pin count.; LQW18AN15NG80D: Same package and pin count. | |
| Inductance H | 20 nH | 22 nH | 15 nH | 22 nH / 15 nH — Very close inductance value (+10%).; LQW18AN15NG80D: Lower inductance value. | |
| Tolerance | ±2% | ±5% | - | ±5% — Wider tolerance than target's ±2%. | |
| Current A | 0.55 A | 0.64 A | 1.4 A | 0.64 A / 1.4 A — Higher current rating.; LQW18AN15NG80D: Higher current rating is beneficial. | |
| Srf Mhz | 4900 MHz | 3200 MHz | 4600 MHz | 3200 MHz / 4600 MHz — Lower SRF may impact high frequency performance.; LQW18AN15NG80D: Slightly lower SRF, check circuit frequency. | |
| Dcr Ohm | 0.16 Ω | - | 0.075 Ω | 0.075 Ω — Lower DCR reduces power loss. |
The best alternative is likely LQW18AN22NJ10D, which has a very close inductance of 22nH and a higher current rating. However, you must verify if its lower Self-Resonant Frequency (3200MHz) and wider tolerance (±5%) are acceptable for your circuit.