What risks should I check before replacing MBRA130LT3G?

The main risks are electrical. Ensure the replacement is a Schottky diode, not a standard or fast-recovery type. Check the forward voltage (Vf) at your operating current, as a higher Vf increases power loss and heat. Also, verify the voltage and current ratings are sufficient.

MBRA130LT3G Alternatives, Datasheet & Cross Reference | onsemi

MBRA130LT3G is a 30V, 1A Schottky rectifier in a compact SMA package from onsemi, ideal for high-frequency applications. This page reviews potential alternatives, focusing on electrical and mechanical compatibility.

AI replacement insight

Electrical riskmedium

Forward voltage (Vf) and diode type (Schottky) are critical and must be matched.

Package risklow

SMA (DO-214AC) is a standard package with many sources.

Sourcing risklow

Multiple vendors produce similar 1A Schottky diodes in SMA packages.

Can it be replaced directly?

Direct replacement for MBRA130LT3G should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.

Best replacement path

SS14_R1_00001 offers the closest parametric match, while SS26 provides an upgrade in current/voltage ratings. Both require checking the forward voltage impact.

Main risk

The primary risk is substituting with a non-Schottky diode or one with a significantly higher forward voltage, which can degrade efficiency and cause thermal issues.

Recommended alternatives

Pin-compatible Schottky diode with a higher voltage rating (40V). Review minor increase in forward voltage.

View details

Alternative comparison matrix

Feature / factor	MBRA130LT3G	SS14_R1_00001	SS26	Compatibility / risk
Package	DO-214AC, SMA	DO-214AC, SMA	DO-214AC, SMA	DO-214AC, SMA — Same package and pinout.; SS26: Same package and pinout.
Diode Type	Schottky	Schottky	Schottky	Schottky — Both are Schottky rectifiers.; SS26: Both are Schottky rectifiers.
Voltage	30V	40V	60V	40V / 60V — Higher voltage rating provides more margin.; SS26: Higher voltage rating provides more margin.
Current	1A	1A	2A	1A / 2A — Same current rating.; SS26: Higher current rating provides more margin.
Forward Voltage	0.41V @ 1A	0.5V @ 1A	0.7V @ 2A	0.5V @ 1A / 0.7V @ 2A — Slightly higher Vf may increase power loss.; SS26: Vf is higher and specified at a different current. Must verify Vf at 1A from datasheet.

Application & sourcing insights

Questions & answers

Verified drop-in options for MBRA130LT3G are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.