Is there a pin-compatible replacement for MCL1608S2R2MT?

Yes, TDK's MLP1608V2R2BT0S1 is a pin-compatible replacement in the same 1608 (0603 metric) package. While it is a form-fit match, it's considered a 'strong match' requiring review, not a 'verified drop-in', because the original part's saturation current is unknown.

What risks should I check before replacing MCL1608S2R2MT?

Before replacing, check three main risks: 1) Package Mismatch: Ensure the replacement has the same 1608/0603 footprint. 2) Electrical Downgrade: Avoid parts with a lower current rating. 3) Saturation Current: The biggest risk is the unknown Isat of the original part; verify the replacement's Isat is sufficient for your application.

MCL1608S2R2MT Alternatives, Datasheet & Cross Reference | Shenzhen Sunlord Electronics Co., Ltd.

Finding a substitute for the Sunlord MCL1608S2R2MT 2.2µH inductor involves matching the 0603 package and key electricals. Several options exist, with the primary challenge being the original part's unspecified saturation current.

AI replacement insight

Package risklow

Several candidates match the 0603 package.

Electrical riskmedium

The target's saturation current is unknown, requiring application-specific verification.

Sourcing risklow

Multiple cross-vendor options are available for 2.2µH 0603 inductors.

Can it be replaced directly?

No verified direct drop-in replacement is available without engineering review. TDK's MLP1608V2R2BT0S1 is the closest form-fit candidate, but requires checking the saturation current (Isat) which is unspecified for the original part.

Best replacement path

TDK's MLP1608V2R2BT0S1 is the most promising path, offering a form-fit match with superior current handling. However, the application's saturation current requirement must be verified before use.

Main risk

The primary risk is the unknown saturation current (Isat) of the original part. A replacement might saturate at a lower current than required, causing circuit instability or failure under load.

Recommended alternatives

A form-fit upgrade with higher current handling and lower DCR in the same 0603 package.

View details

Alternative comparison matrix

Feature / factor	MCL1608S2R2MT	MLP1608V2R2BT0S1	MLZ1608A2R2WT000	Compatibility / risk
Package	1608 (0603)	1608 (0603 Metric)	1608 (0603 Metric)	1608 (0603 Metric) — Form-fit compatible.; MLZ1608A2R2WT000: Form-fit compatible.
Inductance	2.2µH	2.2µH	-	2.2µH — Inductance value matches.
Current	0.14A	0.6A	0.13A	0.6A / 0.13A — Significantly higher current rating.; MLZ1608A2R2WT000: Lower rated current is a downgrade.
Dcr	0.52Ω	0.36Ω	0.25Ω	0.36Ω / 0.25Ω — Lower DCR improves efficiency.; MLZ1608A2R2WT000: Lower DCR is an improvement.
Saturation Current	Unknown	Unknown	-	Unknown — Target Isat is unknown, must be verified for the application.

Application & sourcing insights

Questions & answers

The best alternative is likely TDK's MLP1608V2R2BT0S1. It matches the 0603 package and 2.2µH inductance, while offering a much higher current rating (0.6A vs 0.14A) and lower DCR. However, you must verify your circuit's saturation current needs as this is not specified for the original part.