Is there a pin-compatible replacement for MH200V-11-04-1000?

Several candidates share the same 1x4 pin layout, 2.0mm pitch, and through-hole mounting. However, none are confirmed as drop-in electrical equivalents. All require a review of their current rating and temperature range to ensure they are suitable for your application.

What risks should I check before replacing MH200V-11-04-1000?

Primarily, verify the candidate's current rating is 3A or higher. Also, check that the operating temperature range meets or exceeds -40°C to +105°C. Finally, ensure the physical dimensions and lack of a shroud match the original part.

MH200V-11-04-1000 Alternatives, Datasheet & Cross Reference | Dongguan Xingfei Connector Co., Ltd.

Finding a substitute for the XFCN MH200V-11-04-1000 4-pin header requires careful matching of its 2.0mm pitch, single-row layout, and 3A current rating. Alternatives exist but often have lower current ratings or different temperature ranges, requiring careful review.

AI replacement insight

Electrical riskhigh

Many similar parts have lower current ratings (1.5A-2A vs. 3A).

Package riskmedium

Risk of mismatch in rows (e.g., 2x2) or shrouding.

Sourcing risklow

This is a common connector type with many manufacturers.

Can it be replaced directly?

No direct, verified pin-to-pin replacement is identified. Several candidates have a matching form-factor but differ in key electrical parameters like current rating, requiring engineering review.

Best replacement path

Review candidates with a 1x4 pin, 2.0mm pitch layout. Prioritize verifying the current rating (≥3A) and temperature range (≥ -40°C to +105°C) from datasheets.

Main risk

The main risk is substituting with a part that has a lower current rating, which could lead to overheating and failure under load.

Recommended alternatives

A form-fit compatible header with a lower current rating, suitable only for low-power applications.

View details

Alternative comparison matrix

Feature / factor	MH200V-11-04-1000	PZ200-1-04-Z	ZX-PH2.0-LT4P	Compatibility / risk
Current	3 A	1.5 A	2.0 A	1.5 A / 2.0 A — Significant downgrade, only 50% of target's rating.; ZX-PH2.0-LT4P: Downgrade from target's 3A rating.
Package	Through Hole, 1x4, 2.0mm pitch	Through Hole, 1x4, 2.0mm pitch	Through Hole, 4 pos, 2.0mm pitch	Through Hole, 1x4, 2.0mm pitch / Through Hole, 4 pos, 2.0mm pitch — Form and fit are a match.; ZX-PH2.0-LT4P: Row count missing but assumed to be 1.
Voltage	60 VAC/DC	500 V AC/DC	-	500 V AC/DC — Candidate voltage rating is higher.
Temperature	-40°C to +105°C	-	Missing	Missing — Operating temperature must be verified.

Application & sourcing insights

Questions & answers

There is no single best alternative without knowing the application. Candidates like DEALON PH-D-4A offer a similar form factor but require datasheet verification for electrical specs. Others like HCTL PZ200-1-04-Z are form-fit compatible but have a lower current rating.