MWTC201608S2R2MT
Sunlord
Needs validationlow risk
A clear upgrade path with identical DCR and package but significantly higher current ratings and wider temperature range.
Best Alternatives to MPL2016S2R2MHT
Finding a replacement for the Sunlord MPL2016S2R2MHT 2.2µH inductor requires matching its 2016 (0806) package, 1.2A current rating, and 0.11Ω DCR. Several alternatives offer significant upgrades in current handling and temperature range.
AI replacement insight
Electrical riskmedium
Target's unspecified saturation current requires careful validation of any replacement's Isat rating to prevent core saturation under load.
Package risklow
The 2016 (0806) package is a common industry standard with many form-fit compatible options.
Can it be replaced directly?
Direct replacement for MPL2016S2R2MHT should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
Best replacement path
Upgrade to a modern molded inductor like Sunlord's MWTC201608S2R2MT for better current handling and thermal performance in the same footprint.
Main risk
The primary risk is substituting with an inductor that has a lower saturation current (Isat) or higher DC Resistance (DCR), which can lead to circuit instability or increased power loss. The target's Isat is not specified, making this a key parameter to verify for any candidate.
Recommended alternatives
4Alternative comparison matrix
| Feature / factor | MPL2016S2R2MHT | MWTC201608S2R2MT | WPN201610U2R2MTY01 | TFM201610ALM-2R2MTAA | Compatibility / risk |
|---|---|---|---|---|---|
| Inductance | 2.2 µH ±20% | 2.2 µH ±20% | 2.2 µH ±20% | 2.2 µH ±20% | 2.2 µH ±20% — matched; WPN201610U2R2MTY01: matched; TFM201610ALM-2R2MTAA: matched; SLM20162R2MIT: matched |
| Package | 2016 (0806) | 2016 (2.0 x 1.6 mm) | 2016 (2.0 x 1.6 mm) | 2016 (2.0 x 1.6 mm) | 2016 (2.0 x 1.6 mm) / 2016 (0806) — Same footprint and height profile.; WPN201610U2R2MTY01: Same footprint.; TFM201610ALM-2R2MTAA: Same footprint.; SLM20162R2MIT: matched |
| Dcr Ohm | 0.11 Ω | 0.11 Ω | 0.10 Ω | 0.146 Ω | 0.11 Ω / 0.10 Ω / 0.146 Ω — Identical DCR ensures no change in DC power loss.; WPN201610U2R2MTY01: Slightly lower DCR improves efficiency.; TFM201610ALM-2R2MTAA: Higher DCR will increase DC power loss.; SLM20162R2MIT: matched |
| Current A | 1.2 A | 2.5 A | 1.9 A | 1.9 A | 2.5 A / 1.9 A / 1.2 A — Over 2x higher thermal current rating.; WPN201610U2R2MTY01: Higher thermal current rating.; TFM201610ALM-2R2MTAA: Higher thermal current rating.; SLM20162R2MIT: matched |
| Saturation Current A | Not Specified | 2.3 A | 2.6 A | 2.4 A | 2.3 A / 2.6 A / 2.4 A / Not Specified — Significantly higher saturation current provides more stability under peak loads.; WPN201610U2R2MTY01: Much higher saturation current.; TFM201610ALM-2R2MTAA: Higher saturation current.; SLM20162R2MIT: This critical parameter must be verified from the datasheet. |
| Temperature | -40°C to +85°C | -40°C to +125°C | - | - | -40°C to +125°C — Wider operating temperature range. |
Application & sourcing insights
Questions & answers
Verified drop-in options for MPL2016S2R2MHT are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.