Is there a pin-compatible replacement for MPP104J2J07AJ22600?

No pin-compatible replacement was identified in this review. All close alternatives have a different package or lead spacing.

What risks should I check before replacing MPP104J2J07AJ22600?

Verify the lead pitch (7.5mm), voltage rating (630V or higher), capacitance (100nF), and tolerance (±5%). Any deviation, especially in package or voltage, requires careful engineering review.

MPP104J2J07AJ22600 Alternatives, Datasheet & Cross Reference | KNSCHA

Finding a replacement for the KNSCHA MPP104J2J07AJ22600 100nF 630V film capacitor requires checking both electrical parameters and physical package dimensions. Alternatives exist but may require PCB layout changes.

AI replacement insight

Package riskhigh

Lead pitch differences are common and prevent drop-in replacement.

Electrical risklow

Electrically similar parts are available if package is not a constraint.

Can it be replaced directly?

No direct pin-for-pin replacement was found. The closest alternatives require mechanical adjustments due to different lead spacing.

Best replacement path

The best path is finding a capacitor with 100nF, 630V, ±5% tolerance, and a 7.5mm radial lead pitch. The KNSCHA MPP104J2J10AJ22630 is electrically identical but has a 10mm pitch.

Main risk

The primary risk is package mismatch. Most functional alternatives have a different lead pitch, requiring PCB modification.

Recommended alternatives

Functionally equivalent with same voltage and capacitance, but has a different lead pitch (10mm).

View details

Alternative comparison matrix

Feature / factor	MPP104J2J07AJ22600	MPP104J2J10AJ22630	MPP104J2W10AJ22620	Compatibility / risk
Package	Radial, 7.5mm Pitch	Radial, 10mm Pitch	Radial, 10mm Pitch	Radial, 10mm Pitch — Candidate has wider lead pitch, will not fit without modification.; MPP104J2W10AJ22620: Candidate has wider lead pitch.
Voltage	630V	630V	450V	630V / 450V — Voltage rating matches target requirement.; MPP104J2W10AJ22620: Candidate has a lower voltage rating.
Capacitance	100nF	100nF	100nF	100nF — matched; MPP104J2W10AJ22620: matched
Tolerance	±5%	±5%	±5%	±5% — matched; MPP104J2W10AJ22620: matched

Application & sourcing insights

Questions & answers

MPP104J2J10AJ22630 from KNSCHA is electrically identical (100nF, 630V, ±5%) but has a 10mm lead pitch instead of 7.5mm, requiring board modification.