
XUNPU
A 2-pin, 2.0mm pitch header with lower electrical ratings. Requires careful engineering review before use.
MTP220-1102S1 is a 2-pin, 2.0mm pitch straight header from MINTRON, notable for its high 500V voltage and 3.0A current ratings. Finding a direct replacement requires careful matching of these key electrical specifications.
All candidates have much lower voltage/current ratings (100-250V / 2.0A vs 500V / 3.0A).
While pinout matches, housing dimensions and mating compatibility between different connector series are not guaranteed.
No direct replacement with matching 500V/3.0A ratings was identified among the candidates reviewed.
Downgrade to a 250V/2.0A rated part like ZX-HY2.0-2PLT if the application allows, after thorough electrical analysis.
Electrical overstress due to significantly lower voltage and current ratings of all available alternatives.

XUNPU
A 2-pin, 2.0mm pitch header with lower electrical ratings. Requires careful engineering review before use.
| Feature / factor | MTP220-1102S1 | WAFER-HY2.0-2PZZ | WF-1A200A2P | ZX-HY2.0-2PLT | Compatibility / risk |
|---|---|---|---|---|---|
| Package | Through Hole | Through Hole | Through Hole | Through Hole | Through Hole — Package type matches.; WF-1A200A2P: Package type matches.; ZX-HY2.0-2PLT: Package type matches.; WAFER-PH2.0-2PJK: Package type matches. |
| Pitch | 2.0mm | 2.0mm | 2.0mm | 2.0mm | 2.0mm — Pin pitch matches.; WF-1A200A2P: Pin pitch matches.; ZX-HY2.0-2PLT: Pin pitch matches.; WAFER-PH2.0-2PJK: Pin pitch matches. |
| Voltage | 500V | 250V | 250V | 250V | 250V / 100V — Significantly lower voltage rating.; WF-1A200A2P: Significantly lower voltage rating.; ZX-HY2.0-2PLT: Significantly lower voltage rating.; WAFER-PH2.0-2PJK: Significantly lower voltage rating. |
| Current | 3.0A | 2.0A | 2.0A | 2.0A | 2.0A — Lower current rating.; WF-1A200A2P: Lower current rating.; ZX-HY2.0-2PLT: Lower current rating.; WAFER-PH2.0-2PJK: Lower current rating. |
No direct drop-in replacements were found. Candidates like ZX-HY2.0-2PLT offer a similar form factor but have significantly lower voltage (250V) and current (2.0A) ratings, making them a downgrade risk.