Is there a pin-compatible replacement for NLCV32T-221K-PF?

No, a direct pin-compatible replacement for the NLCV32T-221K-PF in a 1210 package was not found. All suitable functional alternatives require a change in the PCB layout to fit a different package size.

What risks should I check before replacing NLCV32T-221K-PF?

Before replacing, you must verify three main risks: 1) Package incompatibility, as all alternatives need a board redesign. 2) Electrical parameter differences, such as inductance tolerance. 3) Missing critical data, especially the saturation current (Isat), which must be sufficient for your application.

NLCV32T-221K-PF Alternatives, Datasheet & Cross Reference | TDK Electronics AG

The TDK NLCV32T-221K-PF is an End-of-Life 220µH inductor in a 1210 package. While no direct drop-in replacements are available, several functional alternatives exist with superior electrical characteristics that require a PCB layout change.

AI replacement insight

Package riskhigh

Target is 1210 package; all candidates are different sizes (e.g., 1812, 4030), requiring layout changes.

Electrical riskmedium

Key parameters like saturation current are unverified. Some candidates have wider inductance tolerance.

Can it be replaced directly?

No, there are no direct pin-compatible replacements for NLCV32T-221K-PF among the candidates reviewed. All alternatives require a PCB redesign due to different package sizes.

Best replacement path

FHW1812IF221JST is the most promising functional alternative due to its similar DCR and tighter tolerance, but it requires a PCB layout change to accommodate the larger 1812 package.

Main risk

The primary risk is the package mismatch, which makes a direct drop-in replacement impossible and necessitates a board redesign.

Recommended alternatives

Electrically similar alternate with tighter tolerance and higher current, but in a larger 1812 package.

View details

Alternative comparison matrix

Feature / factor	NLCV32T-221K-PF	FHW1812IF221JST	SWPA4030S221MT	Compatibility / risk
Package	3225 (1210 Metric)	1812 (4.5x3.2mm)	4030 (4.0x4.0mm)	1812 (4.5x3.2mm) / 4030 (4.0x4.0mm) — Requires PCB redesign.; SWPA4030S221MT: Requires PCB redesign.
Inductance	220µH ±10%	220µH ±5%	220µH ±20%	220µH ±5% / 220µH ±20% — Tighter tolerance.; SWPA4030S221MT: Wider tolerance.
Current	0.08A	0.17A	0.5A	0.17A / 0.5A — Higher rated current.; SWPA4030S221MT: Higher rated current.
Dcr	8.4Ω	8.0Ω	1.26Ω	8.0Ω / 1.26Ω — Very similar DCR.; SWPA4030S221MT: Lower DCR improves efficiency.
Saturation Current	Not specified	Not specified	0.4A	Not specified / 0.4A — Must be verified from datasheet.; SWPA4030S221MT: Target Isat unknown.

Application & sourcing insights

Questions & answers

The best functional alternative is FHW1812IF221JST. It offers tighter tolerance (±5%) and higher current (170mA) with a similar DCR, but requires a board redesign for its larger 1812 package.