Is there a pin-compatible replacement for PX225K2C2705?

MPX225K31F2KN20800 is a likely pin-compatible replacement as its lead pitch is also 27.5mm. However, you must verify all physical dimensions from its datasheet to confirm a perfect fit before ordering.

What risks should I check before replacing PX225K2C2705?

The main risks are package mismatch and incorrect capacitor technology. Ensure the replacement has a 27.5mm lead pitch. Also, confirm it is an X2-rated safety film capacitor, not a standard electrolytic or film type.

PX225K2C2705 Alternatives, Datasheet & Cross Reference | KYET

Finding a substitute for the KYET PX225K2C2705 involves matching its 2.2µF capacitance, 310VAC rating, and critical 27.5mm lead pitch. This page analyzes potential alternatives for your application.

AI replacement insight

Electrical risklow

Key electricals (capacitance, voltage, tolerance) are matched by several candidates.

Package riskhigh

Lead pitch is a critical parameter. Only one candidate (MPX225K31F2KN20800) appears to match the target's 27.5mm spacing.

Can it be replaced directly?

A direct, pin-for-pin replacement is likely available with MPX225K31F2KN20800, but requires verification of its physical dimensions from the datasheet before procurement.

Best replacement path

The KNSCHA MPX225K31F2KN20800 is the most promising replacement path, offering matching electrical specifications and a 27.5mm lead pitch.

Main risk

The primary risk when substituting is a mechanical mismatch in lead pitch. Several candidates are electrically similar but will not fit the PCB layout.

Recommended alternatives

A strong alternative with matching key electricals and 27.5mm lead pitch, pending datasheet verification.

View details

Alternative comparison matrix

Feature / factor	PX225K2C2705	MPX225K31F2KN20800	PX225K2C2203	Compatibility / risk
Capacitance	2.2 µF	2.2 µF	2.2 µF	2.2 µF — Capacitance matches.; PX225K2C2203: Capacitance matches.
Voltage	310 VAC	310 VAC	310 VAC	310 VAC — Voltage rating matches target's requirement.; PX225K2C2203: Voltage rating matches.
Tolerance	±10%	±10%	-	±10% — Tolerance matches.
Package	Radial, 27.5mm Lead Pitch	Radial, P=27.5mm	Radial, 22.5mm Lead Pitch	Radial, P=27.5mm / Radial, 22.5mm Lead Pitch — Lead pitch appears to match target's 27.5mm.; PX225K2C2203: Lead pitch is smaller and will not fit without board modification.
Application	X2	X2	X2	X2 — Both are X2 class safety capacitors.; PX225K2C2203: Both are X2 class safety capacitors from the same manufacturer.

Application & sourcing insights

Questions & answers

The best alternative identified is MPX225K31F2KN20800 from KNSCHA. It matches the key electrical specs and, most importantly, the 27.5mm lead pitch.