Is there a pin-compatible replacement for PZ200-2-05-W?

No pin-compatible replacement has been confirmed. While several parts match the pin count, pitch, and orientation, they have critical differences in voltage rating and require mechanical footprint verification to be considered for a replacement.

What risks should I check before replacing PZ200-2-05-W?

The main risks are electrical and mechanical. First, ensure your circuit's operating voltage does not exceed the substitute's rating (typically 250V). Second, compare the datasheet drawings to confirm the PCB footprint, pin dimensions, and shroud size match your design.

PZ200-2-05-W Alternatives, Datasheet & Cross Reference | HCTL

Finding a substitute for the HCTL PZ200-2-05-W, a 10-pin right-angle header, is challenging due to its high 500V rating. While alternatives with similar form factors exist, they typically have lower voltage ratings, requiring careful electrical and mechanical verification.

AI replacement insight

Electrical riskhigh

All candidates have a 250V rating vs. the target's 500V. Use in a 500V system is unsafe.

Package riskmedium

Candidates match the basic form factor, but PCB footprint and shroud dimensions must be verified from datasheets to ensure mechanical fit and mating.

Can it be replaced directly?

No direct, drop-in replacement has been identified due to the target's high 500V rating. All potential alternatives have a lower voltage rating and require careful engineering review.

Best replacement path

Verify if the application's actual voltage requirement is 250V or less. If so, the JST part S10B-PUDSS-1(LF)(SN) is a promising candidate after verifying its mechanical footprint.

Main risk

The primary risk is electrical overstress, as all potential substitutes are rated for 250V, far below the target's 500V rating.

Recommended alternatives

A 10-pin right-angle header from JST with a lower voltage rating that requires mechanical and electrical review.

View details

Alternative comparison matrix

Feature / factor	PZ200-2-05-W	S10B-PUDSS-1(LF)(SN)	HX PZ2.0-2x5P WZ	S10B-PHDSS(LF)(SN)	Compatibility / risk
Package	Through Hole, Right Angle	Through Hole, Right Angle	Right Angle	Through Hole, Right Angle	Through Hole, Right Angle — Mounting type matches. Verify footprint from datasheet.; HX PZ2.0-2x5P WZ: Mounting orientation matches. Verify it is Through-Hole and check footprint.; S10B-PHDSS(LF)(SN): Mounting type matches. Belongs to JST's PHD series, verify footprint.
Voltage	500V	250V	250V AC/DC	250V	250V / 250V AC/DC — Candidate voltage is significantly lower.; HX PZ2.0-2x5P WZ: Candidate voltage is significantly lower.; S10B-PHDSS(LF)(SN): Candidate voltage is significantly lower.
Current	1.5A	3A	1.5A	3A	3A / 1.5A — Higher current rating provides more margin.; HX PZ2.0-2x5P WZ: Current rating matches.; S10B-PHDSS(LF)(SN): Higher current rating is an improvement.
Pinout	2.0mm, 2x5	2.0mm, 2x5	2.0mm, 2x5	-	2.0mm, 2x5 — Pitch and position count match.; HX PZ2.0-2x5P WZ: Pitch and position count match.
Application	Generic (PZ200 series)	-	-	JST PHD Series	JST PHD Series — Different connector family implies different mating part.

Application & sourcing insights

Questions & answers

The JST connector S10B-PUDSS-1(LF)(SN) is a potential alternative if your application can tolerate a lower voltage rating of 250V. You must verify the mechanical footprint and voltage requirements before use.