Needs validationmedium risk
Electrically strong substitute (250V, 3A), but mechanical compatibility of the JST PA family must be confirmed.
Best Alternatives to PZ200V-11-04P
Searching for a PZ200V-11-04P replacement? This 4-pin, 2.0mm header has several potential alternatives, but careful review of mechanical dimensions and electrical ratings is required.
AI replacement insight
Package riskhigh
Candidates are from specific, keyed connector families unlike the generic target.
Electrical riskmedium
One candidate has a significantly lower voltage rating.
Can it be replaced directly?
No confirmed direct drop-in replacement has been identified. Several candidates match key parameters but belong to different connector families, which poses a mechanical fit risk.
Best replacement path
Verify if the original application uses a generic header or a specific family like JST PH. The best path is finding a substitute with identical mechanical drawings and equal or better ratings.
Main risk
The primary risk is mechanical incompatibility. Using a substitute from a different connector family may prevent proper mating or cause PCB footprint misalignment.
Recommended alternatives
2Alternative comparison matrix
| Feature / factor | PZ200V-11-04P | B04B-PASK-1(LF)(SN) | B4B-PH-K-S(LF)(SN) | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Voltage | 250V | 250V | - | 100V — Significant downgrade from target's 250V rating. | |
| Current | 1.5A | 3A | - | 2A — Higher current rating is an upgrade. | |
| Package | Through Hole, Straight | Through Hole, JST PA Family | - | Through Hole, JST PH Family — Belongs to a specific connector family; shroud and keying must be verified. |
Application & sourcing insights
Questions & answers
The best alternative is a 4-pin, 2.0mm pitch straight header with an identical PCB footprint, shroud dimensions, and ratings of at least 250V and 1.5A. Candidates like JST's B04B-PASK-1 offer strong electricals but require mechanical verification.