Is there a pin-compatible replacement for PZ254V-11-02P?

Yes, parts like A2541WV-2P and MTP125-1102S1 are likely pin-compatible as they share the same 2.54mm pitch, pin count, and straight orientation. A review of the datasheets to compare pin length and housing dimensions is required to confirm a 100% drop-in fit.

What risks should I check before replacing PZ254V-11-02P?

The main risk is mechanical incompatibility. Check the pin length, pin square dimension, and the plastic housing's height and width. Also, verify the contact plating material (e.g., tin vs. gold) if your application is sensitive to contact resistance or mating cycles.

PZ254V-11-02P Alternatives, Datasheet & Cross Reference | Dongguan Xingfei Connector Co., Ltd.

PZ254V-11-02P is a common 2-pin, 2.54mm pitch vertical male header. Several cross-vendor functional alternatives are available, offering similar performance and form factor, but require mechanical verification.

AI replacement insight

Package riskmedium

Requires verification of mechanical drawings for pin length and housing dimensions to ensure a perfect fit.

Electrical risklow

Multiple candidates match or exceed the target's voltage, current, and temperature ratings.

Sourcing risklow

This is a common connector type with many manufacturers and wide availability.

Can it be replaced directly?

No officially documented direct replacement exists, but several parts are functionally equivalent and likely form-fit compatible.

Best replacement path

Use a cross-vendor straight header like A2541WV-2P or MTP125-1102S1 after verifying mechanical drawings.

Main risk

The primary risk is mechanical mismatch. While pitch and pin count match, subtle differences in pin length or housing dimensions could cause assembly issues.

Recommended alternatives

A cross-vendor alternative with matching key electrical and mechanical specifications.

View details

Alternative comparison matrix

Feature / factor	PZ254V-11-02P	A2541WV-2P	MTP125-1102S1	PZ254R-11-02P	Compatibility / risk
Package	2.54mm Pitch Header, Vertical	2.54mm Pitch Header, Straight	-	-	Right Angle Mount — Candidate is not a drop-in replacement due to different orientation.
Pitch	2.54 mm	2.54 mm	-	-	2.54 mm — matched
Current	3.0 A	3 A	-	-	3.0 A — matched
Voltage	250 V	250 V	-	-	500 V — Higher voltage rating provides more margin.
Temperature	-40°C to +105°C	-40°C to +105°C	-	-	-40°C to +105°C — matched
Family	PZ254V	-	-	PZ254R	PZ254R — Same manufacturer and series.

Application & sourcing insights

Questions & answers

A2541WV-2P by CJT is a strong candidate, offering matching electrical ratings, temperature range, and a vertical through-hole package. However, you should always verify the mechanical dimensions in the datasheet.