
Yageo
A strong pin-compatible alternative from Yageo with identical key electrical specs and package.
The RC-01W56R0FT from FH is a general-purpose 56Ω thick film chip resistor in a compact 0201 package, rated for 0.05W with a ±1% tolerance. This component is widely used in space-constrained electronics.
Primary parameters match on best candidate. Secondary parameters need review.
Standard 0201 package is highly interchangeable.
This is a high-volume, multi-source commodity component.
Direct replacement for RC-01W56R0FT should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
The most direct path is to use a cross-vendor part with identical primary specifications, such as Yageo's RC0201FR-0756RL.
The main risk is relying on a cross-vendor part without full datasheet validation, as secondary characteristics may differ.

Yageo
A strong pin-compatible alternative from Yageo with identical key electrical specs and package.
| Feature / factor | RC-01W56R0FT | RC0201FR-0756RL | RC-01W51R0FT | 0201WMF604JTEE | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 0201 | 0201 | 0201 | 0201 | 0201 — Same EIA package code.; RC-01W51R0FT: Same EIA package code.; 0201WMF604JTEE: Same EIA package code. |
| Resistance | 56.0 Ohm | 56.0 Ohm | 51.0 Ohm | 60.4 Ohm | 56.0 Ohm / 51.0 Ohm / 60.4 Ohm — Identical resistance value.; RC-01W51R0FT: Resistance is ~9% lower than target's 56Ω.; 0201WMF604JTEE: Resistance is ~8% higher than target's 56Ω. |
| Tolerance | 1.0% | 1.0% | 1.0% | 1.0% | 1.0% — Identical tolerance.; RC-01W51R0FT: Identical tolerance.; 0201WMF604JTEE: Identical tolerance. |
| Power | 0.05 W | 0.05 W | 0.05 W | - | 0.05 W — Identical power rating.; RC-01W51R0FT: Identical power rating. |
| Tcr | ±200ppm/℃ | ±200 ppm/°C | - | missing | ±200 ppm/°C / missing — Matching temperature coefficient.; 0201WMF604JTEE: TCR data not found in structured specs. |
Verified drop-in options for RC-01W56R0FT are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.