
UNI-ROYAL
Pin-compatible 130Ω 1% 0402 resistor, but requires TCR verification against the target's ±100ppm/℃.
Find and compare alternatives for the RC-02K1300FT, a 130Ω ±1% 1/16W 0402 thick film chip resistor. Review pin-compatible and parametric alternatives from leading manufacturers.
TCR mismatch is a common issue for precision resistors.
All viable candidates use the same 0402 package.
Multiple vendors produce similar 0402 resistors.
Direct replacement for RC-02K1300FT should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
The most direct path is 0402WGF1300TCE, which matches key parameters but needs TCR verification. For applications tolerant of a ~8% resistance change, AEC-Q200 qualified parts like AC0402FR-07120RL offer higher reliability.
The primary risk is an unspecified or mismatched Temperature Coefficient of Resistance (TCR), which can cause performance drift in precision or temperature-sensitive circuits.

UNI-ROYAL
Pin-compatible 130Ω 1% 0402 resistor, but requires TCR verification against the target's ±100ppm/℃.
| Feature / factor | RC-02K1300FT | 0402WGF1300TCE | AC0402FR-07120RL | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Resistance | 130 Ω | 130 Ω | 120 Ω | 130 Ω / 120 Ω — Exact match.; AC0402FR-07120RL: Resistance is ~7.7% lower than target. | |
| Tolerance | ±1% | ±1% | ±1% | ±1% — Exact match.; AC0402FR-07120RL: Exact match. | |
| Power | 1/16W | 1/16W | - | 1/16W — Matches target power rating. | |
| Package | 0402 | 0402 | 0402 | 0402 — Matches package for drop-in compatibility.; AC0402FR-07120RL: Matches package. | |
| Tcr | ±100ppm/℃ | Not Specified | ±100 ppm/°C | Not Specified / ±100 ppm/°C — TCR is a key parameter for precision, must be verified.; AC0402FR-07120RL: Matches target TCR. | |
| Application | Commercial | - | AEC-Q200 | AEC-Q200 — Automotive qualification is an upgrade. |
Verified drop-in options for RC-02K1300FT are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.