Is there a pin-compatible replacement for RC0201FR-0711KL?

While no exact pin-compatible replacement with 11kΩ resistance was found, parts like RE0201BRE0710KL (10kΩ) and RC0201FR-0712KL (12kΩ) share the same 0201 package and pinout. They are form-fit compatible but require electrical review due to the resistance difference.

What risks should I check before replacing RC0201FR-0711KL?

The main risk is the change in resistance from 11kΩ to either 10kΩ or 12kΩ. This can affect the performance of analog circuits, filters, voltage dividers, and feedback loops. You must verify if this deviation is within your design's tolerance.

RC0201FR-0711KL Alternatives, Datasheet & Cross Reference | Yageo

Find and compare alternatives for the Yageo RC0201FR-0711KL, a general-purpose 11kΩ 1% 1/20W thick film resistor in a 0201 package. This page analyzes potential substitutes based on key electrical and physical parameters.

AI replacement insight

Electrical riskmedium

Resistance differs by ~9%, which requires circuit analysis.

Package risklow

All recommended alternatives use the same 0201 package.

Can it be replaced directly?

There is no direct 1:1 replacement with 11kΩ resistance among the reviewed candidates. However, several form-fit compatible parts with 10kΩ or 12kΩ resistance are available and may be suitable after review.

Best replacement path

For higher reliability, consider the automotive-grade AC0201FR-0710KL. For higher precision, RE0201BRE0710KL is a strong choice. Both require validating the 10kΩ resistance.

Main risk

The primary risk is the deviation from the target's 11kΩ resistance, which could alter circuit behavior such as gain, timing, or sensor readings.

Recommended alternatives

Automotive-grade (AEC-Q200) upgrade with 10kΩ resistance in the same 0201 package.

View details

Alternative comparison matrix

Feature / factor	RC0201FR-0711KL	AC0201FR-0710KL	RE0201BRE0710KL	RC0201FR-0712KL	Compatibility / risk
Package	0201	0201	0201	0201	0201 — Form-fit compatible.; RE0201BRE0710KL: Form-fit compatible.; RC0201FR-0712KL: Form-fit compatible.
Resistance	11 kΩ	10 kΩ	10 kΩ	12 kΩ	10 kΩ / 12 kΩ — 9% lower resistance. Requires circuit validation.; RE0201BRE0710KL: 9% lower resistance. Requires circuit validation.; RC0201FR-0712KL: 9% higher resistance. Requires circuit validation.
Application	General Purpose	AEC-Q200	-	-	AEC-Q200 — Automotive grade offers higher reliability.
Temperature	-55°C to +125°C	-55°C to +155°C	-55°C to +155°C	-	-55°C to +155°C — Wider operating range.; RE0201BRE0710KL: Wider operating range.
Tolerance	±1%	-	±0.1%	±1%	±0.1% / ±1% — Higher precision than target.; RC0201FR-0712KL: Matches target tolerance.
Tcr	±200 ppm/°C	-	±50 ppm/°C	±200 ppm/°C	±50 ppm/°C / ±200 ppm/°C — More stable over temperature.; RC0201FR-0712KL: Matches target TCR.

Application & sourcing insights

Questions & answers

The best alternative depends on your priority. For higher reliability, AC0201FR-0710KL is an automotive-grade option. For higher precision, RE0201BRE0710KL offers tighter tolerance and TCR. Both have 10kΩ resistance and require engineering validation.