
Yageo
A strong parametric alternative from the same manufacturer and series with a very close resistance value of 2.15kΩ.
Yageo's RC0402FR-072K1L is a common 0402 thick film resistor with a 2.1kΩ resistance, ±1% tolerance, and 62.5mW power rating. Numerous parametric alternatives with slightly different resistance values are available from various manufacturers.
Resistance mismatch is the main electrical risk; most alternatives are within 5%.
All suggested alternatives share the same 0402 package, ensuring form and fit compatibility.
This is a very common resistor value and package, with many available sources.
Direct replacement for RC0402FR-072K1L should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
For a direct drop-in, verify UNI-ROYAL 0402WGF2101TCE. For a reliable alternative, use a part from the same Yageo RC series with the closest resistance, like RC0402FR-072K15L.
The primary risk is substituting with a resistor of a different value, which could alter circuit behavior if the tolerance is tight.

Yageo
A strong parametric alternative from the same manufacturer and series with a very close resistance value of 2.15kΩ.
| Feature / factor | RC0402FR-072K1L | RC0402FR-072K15L | SCR0402F2K | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Resistance | 2.1 kΩ | 2.15 kΩ | 2.0 kΩ | 2.15 kΩ / 2.0 kΩ — 2.4% higher than target. May be acceptable in many circuits.; SCR0402F2K: 4.8% lower than target. Verify circuit impact. | |
| Power | 0.0625 W | 0.0625 W | 0.0625 W | 0.0625 W — Identical power rating.; SCR0402F2K: Identical power rating. | |
| Tcr | ±100 ppm/°C | ±100 ppm/°C | ±100 ppm/°C | ±100 ppm/°C — Identical temperature coefficient.; SCR0402F2K: Identical temperature coefficient. | |
| Package | 0402 | 0402 | 0402 | 0402 — Same 0402 package.; SCR0402F2K: Same 0402 package. |
Verified drop-in options for RC0402FR-072K1L are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.