
FH (Guangdong Fenghua Advanced Tech)
A 220Ω 0805 resistor with upgraded 1% tolerance, but requires power dissipation review.
Yageo's RC0805JR-07220RL is a common 220Ω, 5% tolerance, 0.125W thick film resistor in an 0805 package. This page reviews and compares several potential alternatives.
Power and voltage ratings of substitutes may not have sufficient margin for all applications.
The 0805 package is highly standardized, ensuring physical compatibility.
Yes, several manufacturers offer 220Ω 0805 resistors. RS-05K2200FT is a strong candidate with improved 1% tolerance.
Upgrade to a 1% tolerance part like RS-05K2200FT, provided the application's power dissipation is well below 0.125W.
Most alternatives match the 0.125W power rating but offer no margin. The original design's safety margins must be confirmed.

FH (Guangdong Fenghua Advanced Tech)
A 220Ω 0805 resistor with upgraded 1% tolerance, but requires power dissipation review.
| Feature / factor | RC0805JR-07220RL | RS-05K2200FT | FRC0805F2200TS | FRC0805F2000TS | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 0805 | 0805 | 0805 (2012 Metric) | 0805 | 0805 / 0805 (2012 Metric) — Matches form and fit.; FRC0805F2200TS: Matches form and fit.; FRC0805F2000TS: Matches form and fit.; FRC0805F2400TS: Matches form and fit. |
| Resistance | 220.0 Ω | 220.0 Ω | 220.0 Ω | 200.0 Ω | 220.0 Ω / 200.0 Ω / 240.0 Ω — Identical resistance value.; FRC0805F2200TS: Identical resistance value.; FRC0805F2000TS: ~9% lower resistance.; FRC0805F2400TS: ~9% higher resistance. |
| Tolerance | 5.0 % | 1.0 % | 1.0 % | 1.0 % | 1.0 % — Tighter tolerance is a performance upgrade.; FRC0805F2200TS: Tighter tolerance is a performance upgrade.; FRC0805F2000TS: Tighter tolerance.; FRC0805F2400TS: Tighter tolerance. |
| Power | 0.125 W | 0.125 W | 0.125 W | - | 0.125 W — No power margin over target.; FRC0805F2200TS: No power margin over target. |
| Tcr | Not specified | - | ±100 ppm/°C | - | ±100 ppm/°C — Improved temperature stability. |
The best alternative is likely RS-05K2200FT, which offers a tighter 1% tolerance. However, you must verify that your circuit's power dissipation is safely below its 0.125W rating.