
UNI-ROYAL
A potential pin-compatible part. TCR and lifecycle status require verification before use.
Yageo's RC2512FK-0751RL is a common 51Ω 1W 1% 2512 thick film resistor. Several pin-compatible alternatives exist, though careful verification of the temperature coefficient (TCR) is recommended.
Low if TCR is matched; medium if tolerance or resistance differs.
All reviewed candidates use the same 2512 package.
This is a common resistor value and package with multiple vendors.
Direct replacement for RC2512FK-0751RL should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
Start with Datasheet verified or Strong match candidates for RC2512FK-0751RL, then review parametric alternatives for package and electrical fit.
The main risk is using a substitute with a different or unspecified Temperature Coefficient of Resistance (TCR), impacting circuit performance.

UNI-ROYAL
A potential pin-compatible part. TCR and lifecycle status require verification before use.
| Feature / factor | RC2512FK-0751RL | 25121WF510JT4E | FRC2512F51R0TS | RC-12K51R0FT | Compatibility / risk |
|---|---|---|---|---|---|
| Resistance | 51 Ω | 51 Ω | 51 Ω | 51 Ω | 51 Ω — Nominal resistance value.; FRC2512F51R0TS: Nominal resistance value.; RC-12K51R0FT: Nominal resistance value. |
| Tolerance | ±1% | ±1% | ±1% | ±1% | ±1% — Resistance tolerance.; FRC2512F51R0TS: Resistance tolerance.; RC-12K51R0FT: Resistance tolerance. |
| Power | 1 W | 1 W | 1 W | 1 W | 1 W — Power rating.; FRC2512F51R0TS: Power rating.; RC-12K51R0FT: Power rating. |
| Package | 2512 | 2512 | 2512 | 2512 | 2512 — EIA package code.; FRC2512F51R0TS: EIA package code.; RC-12K51R0FT: EIA package code. |
| Lifecycle | Active | - | - | - | - — Lifecycle status is unknown. |
| Tcr | ±100 ppm/°C | - | Not specified | ±100ppm/℃ | Not specified / ±100ppm/℃ — Datasheet indicates ±100ppm/°C.; RC-12K51R0FT: Temperature coefficient. |
Verified drop-in options for RC2512FK-0751RL are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.