MFJ06HR010FT
FH (Guangdong Fenghua Advanced Tech)
Needs validationlow risk
A strong pin-compatible match on all key electricals, but lacks the target's AEC-Q200 qualification.
Best Alternatives to RLM12FTCMR010
Find and compare replacements for the TAI-TECH RLM12FTCMR010, a 1W, 10mΩ, 1% AEC-Q200 current sense resistor. Alternatives are available but require careful review of TCR and automotive qualification.
AI replacement insight
Electrical riskmedium
Several candidates have a weaker TCR, which can impact precision over temperature.
Package risklow
Most candidates share the same 1206 package, ensuring physical compatibility.
Sourcing riskhigh
Using a non-AEC-Q200 part in an automotive design introduces significant qualification and reliability risk.
Can it be replaced directly?
Direct replacement for RLM12FTCMR010 should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
Best replacement path
For a non-automotive application, MFJ06HR010FT is the best path as it matches all key electricals. For an AEC-Q200 application, FMF06FTHR010-LH is the best choice, but requires validating the impact of its slightly higher TCR.
Main risk
The main risks are mismatched Temperature Coefficient of Resistance (TCR) affecting measurement accuracy, and lack of AEC-Q200 qualification for automotive use.
Recommended alternatives
3Alternative comparison matrix
| Feature / factor | RLM12FTCMR010 | MFJ06HR010FT | FMF06FTHR010-LH | HoLR1206-1W-10mR-1%-75ppm | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 1206 | 1206 | - | - | 1206 — matched |
| Resistance | 10mΩ | 10mΩ | - | - | 10mΩ — matched |
| Power | 1W | 1W | - | - | 1W — matched |
| Tcr | ±50 ppm/°C | ±50 ppm/℃ | - | - | ±75 ppm/°C — Candidate TCR is weaker, which may affect precision. |
| Qualification | AEC-Q200 | Not specified | - | - | Not specified — Target is AEC-Q200 qualified; candidate is not. |
Application & sourcing insights
Questions & answers
Verified drop-in options for RLM12FTCMR010 are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.