
Milliohm
Pin-compatible 60mΩ 1% resistor in 2512 package with higher 3W power rating. Lacks specified AEC-Q200 qualification.
TAI-TECH's RLP25FEER060 is an AEC-Q200 qualified 2W, 60mΩ, 1% current sense resistor in a 2512 package. Finding a substitute requires matching these key parameters and verifying automotive qualification.
Candidates offer a higher power rating, which is a safe upgrade.
Candidates share the same 2512 package, ensuring form-fit compatibility.
Using a non-AEC-Q200 part in an automotive design can lead to qualification failure and field recalls.
Direct replacement for RLP25FEER060 should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
Use a parametrically similar part like MA251230FR060FZ, but you must verify if its commercial grade is acceptable for your application.
Loss of AEC-Q200 automotive qualification, which is critical for reliability and safety in automotive environments.

Milliohm
Pin-compatible 60mΩ 1% resistor in 2512 package with higher 3W power rating. Lacks specified AEC-Q200 qualification.
| Feature / factor | RLP25FEER060 | HoLLR2512-3W-60mR-1% | MA251230FR060FZ | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Power | 2W | 3W | 3W | 3W — Candidate has higher power rating.; MA251230FR060FZ: Candidate has higher power rating. | |
| Resistance | 60mΩ | 60mΩ | 60mΩ | 60mΩ — matched; MA251230FR060FZ: matched | |
| Tolerance | ±1% | ±1% | ±1% | ±1% — matched; MA251230FR060FZ: matched | |
| Tcr | ±50ppm/℃ | ±50ppm/°C | ±50ppm/℃ | ±50ppm/°C / ±50ppm/℃ — matched; MA251230FR060FZ: matched | |
| Package | 2512 | 2512 | 2512 | 2512 — matched; MA251230FR060FZ: matched | |
| Application | AEC-Q200 | Not Specified | Not Specified | Not Specified — Target is AEC-Q200 qualified.; MA251230FR060FZ: Target is AEC-Q200 qualified. |
Verified drop-in options for RLP25FEER060 are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.