
FOJAN
This FOJAN resistor is a direct cross-vendor alternative, matching all key electrical and physical parameters.
Find verified substitutes for the RS-03K1133FT, a 113kΩ 1% 0.1W 0603 thick film resistor. This guide provides pin-compatible alternatives and parametric options to manage sourcing challenges.
Low if key parameters (Resistance, Power, TCR, Voltage) are matched.
0603 is a highly standardized package, making physical replacement straightforward.
This is a common resistor value; using cross-vendor alternatives mitigates sourcing risk.
Direct replacement for RS-03K1133FT should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
Start with Datasheet verified or Strong match candidates for RS-03K1133FT, then review parametric alternatives for package and electrical fit.
The primary risk is ensuring the substitute's temperature coefficient (TCR) and voltage ratings are equivalent, as these can impact circuit stability and reliability.

FOJAN
This FOJAN resistor is a direct cross-vendor alternative, matching all key electrical and physical parameters.
| Feature / factor | RS-03K1133FT | FRC0603F1133TS | RC0603FR-07113KL | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 0603 | 0603 | 0603 | 0603 — Package size matches.; RC0603FR-07113KL: Package size matches. | |
| Resistance | 113kΩ | 113kΩ | 113kΩ | 113kΩ — Resistance value matches.; RC0603FR-07113KL: Resistance value matches. | |
| Tolerance | ±1% | ±1% | ±1% | ±1% — Tolerance matches.; RC0603FR-07113KL: Tolerance matches. | |
| Power | 0.1W | 0.1W | 0.1W | 0.1W — Power rating matches.; RC0603FR-07113KL: Power rating matches target. Source data had an error showing 1W, but datasheet confirms 0.1W. | |
| Tcr | ±100ppm/℃ | ±100 ppm/°C | ±100 ppm/°C | ±100 ppm/°C — Temperature coefficient matches.; RC0603FR-07113KL: Temperature coefficient matches. |
Verified drop-in options for RS-03K1133FT are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.