
FOJAN
A pin-compatible 360kΩ, 1%, 100mW, 0603 thick film resistor from FOJAN.
Find and compare alternatives for the RS-03K3603FT, a 360kΩ 1% 100mW 0603 thick film resistor. This page provides pin-compatible options and parametric alternatives for your design.
Low for direct matches, medium for parametric alternatives due to resistance changes.
All recommended candidates are in the same 0603 package.
Check stock and lead time for the chosen alternative manufacturer.
Direct replacement for RS-03K3603FT should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
The most direct path is FRC0603F3603TS, which matches all key electrical and physical parameters.
The main risk when substituting is using a part with a different resistance value, which can alter circuit behavior, such as timing or gain.

FOJAN
A pin-compatible 360kΩ, 1%, 100mW, 0603 thick film resistor from FOJAN.
| Feature / factor | RS-03K3603FT | FRC0603F3603TS | RS-03K3303FT | RS-03K3903FT | Compatibility / risk |
|---|---|---|---|---|---|
| Resistance | 360kΩ | 360kΩ | 330kΩ | 390kΩ | 360kΩ / 330kΩ / 390kΩ — Exact match; RS-03K3303FT: -8.4% deviation; RS-03K3903FT: +8.3% deviation; RT0603BRD07330KL: -8.4% deviation |
| Tolerance | ±1% | ±1% | ±1% | ±1% | ±1% / ±0.1% — Exact match; RS-03K3303FT: Exact match; RS-03K3903FT: Exact match; RT0603BRD07330KL: Tighter tolerance |
| Power | 0.1W | 0.1W | 0.1W | 0.1W | 0.1W — Matches target, no derating margin.; RS-03K3303FT: Matches target; RS-03K3903FT: Matches target |
| Tcr | ±100ppm/℃ | ±100 ppm/°C | - | - | ±100 ppm/°C / 25 ppm/°C — Exact match; RT0603BRD07330KL: Better stability |
| Package | 0603 | 0603 | 0603 | 0603 | 0603 — Matches EIA 0603 package.; RS-03K3303FT: Matches package; RS-03K3903FT: Matches package |
| Technology | Thick Film | - | - | - | Thin Film — May offer lower noise |
Verified drop-in options for RS-03K3603FT are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.