RS-06L106JT
FH (Guangdong Fenghua Advanced Tech)
Needs validationmedium risk
Parametric alternative with same resistance and power, but weaker tolerance (5% vs 1%).
Best Alternatives to RS-06L1005FT
Find and compare replacements for the Fenghua RS-06L1005FT, a 10MΩ 1% 0.25W 1206 thick film resistor. This guide covers parametric alternatives, potential upgrades, and key differences to review.
AI replacement insight
Electrical riskhigh
Tolerance mismatch (1% vs 5%) is the main risk. Using a weaker tolerance part in a precision circuit can cause failure.
Package risklow
All viable candidates use the same 1206 package, ensuring form and fit compatibility.
Sourcing risklow
Multiple manufacturers produce similar 1206 10MΩ resistors, providing a good range of options.
Can it be replaced directly?
No direct, 1-to-1 replacement was found with identical key parameters. Several parts are pin-compatible but have a weaker 5% tolerance, making them parametric alternatives that require engineering review.
Best replacement path
The Vishay MCA1206MD1005BP500 is a strong upgrade path, offering superior tolerance, power rating, and TCR. However, it uses Thin Film technology, which should be verified for the specific application.
Main risk
The primary risk is substituting a 5% tolerance resistor for the original 1% part, which can impact circuit accuracy and performance.
Recommended alternatives
5Alternative comparison matrix
| Feature / factor | RS-06L1005FT | RS-06L106JT | MCA1206MD1005BP500 | CHV1206-JW-106ELF | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 1206 | 1206 | 1206 | 1206 | 1206 — Form factor matches.; MCA1206MD1005BP500: Form factor matches.; CHV1206-JW-106ELF: Form factor matches.; FRC1206J106 TS: Form factor matches. |
| Resistance | 10MΩ | 10MΩ | - | - | 10MΩ — Resistance value matches. |
| Tolerance | 1% | 5% | 0.1% | 5% | 5% / 0.1% — Tolerance is weaker, requires circuit review.; MCA1206MD1005BP500: Tighter tolerance is a direct upgrade.; CHV1206-JW-106ELF: Tolerance is weaker, requires circuit review.; FRC1206J106 TS: Tolerance is weaker, requires circuit review. |
| Power | 0.25W | 0.25W | 0.52W | - | 0.25W / 0.52W — Power rating matches.; MCA1206MD1005BP500: Higher power rating provides more margin.; FRC1206J106 TS: Power rating matches. |
| Tcr | ±250ppm/℃ | ±250ppm/℃ | ±25 ppm/K | ±200 PPM/°C | ±250ppm/℃ / ±25 ppm/K / ±200 PPM/°C / ±100 ppm/°C — Temperature coefficient matches.; MCA1206MD1005BP500: Significantly better temperature stability.; CHV1206-JW-106ELF: Slightly better temperature stability.; FRC1206J106 TS: Better temperature stability. |
| Technology | Thick Film | - | Thin Film | - | Thin Film — Different technology may affect noise/pulse handling. |
| Voltage | ~200V | - | - | 800V | 800V — Much higher voltage rating (800V vs ~200V). |
Application & sourcing insights
Questions & answers
The best alternative is MCA1206MD1005BP500 from Vishay. It's an upgrade with tighter tolerance (0.1%), higher power (0.52W), and better TCR. However, it is a Thin Film resistor, so check if it's suitable for your application.