
Runic Technology
Matches package and voltage, but is a major performance downgrade. Not a drop-in replacement.
RS721XF is a 10MHz CMOS op-amp in a SOT23-5 package. Finding a direct, pin-compatible replacement requires careful matching of dynamic performance like bandwidth and slew rate.
Bandwidth and slew rate are ~10x lower, impacting high-frequency performance.
Candidates share the same SOT23-5 package, but pinout requires verification.
No direct, fully equivalent replacement was found. All candidates have significantly lower dynamic performance (bandwidth and slew rate).
Downgrade to a lower-speed op-amp like RS321BKXF if the application is not speed-sensitive and can tolerate the performance difference.
Significant performance downgrade in bandwidth and slew rate, which can affect signal integrity and circuit stability.

Runic Technology
Matches package and voltage, but is a major performance downgrade. Not a drop-in replacement.
| Feature / factor | RS721XF | RS321BKXF | TP6001-TR | RS8411BXF | Compatibility / risk |
|---|---|---|---|---|---|
| Package | SOT23-5 | SOT23-5 | SOT23-5 | SOT23-5 | SOT23-5 — Package matches.; TP6001-TR: Package matches.; RS8411BXF: Package matches. |
| Voltage | 2.5V to 5.5V | 2.5V to 5.5V | 2.1V to 6.0V | 3V to 36V | 2.5V to 5.5V / 2.1V to 6.0V / 3V to 36V — Supply range matches exactly.; TP6001-TR: Supply range covers target's range.; RS8411BXF: Higher min supply voltage (3V vs 2.5V). |
| Gain Bandwidth | 10 MHz | 1 MHz | 1 MHz | 1.2 MHz | 1 MHz / 1.2 MHz — Significantly lower bandwidth.; TP6001-TR: Significantly lower bandwidth.; RS8411BXF: Significantly lower bandwidth. |
| Slew Rate | 7 V/µs | 0.45 V/µs | 0.7 V/µs | 0.67 V/µs | 0.45 V/µs / 0.7 V/µs / 0.67 V/µs — Significantly lower slew rate.; TP6001-TR: Significantly lower slew rate.; RS8411BXF: Significantly lower slew rate. |
| Offset Voltage | 0.5 mV | - | ±3 mV | - | ±3 mV — Higher offset voltage. |
There are no direct drop-in replacements with matching 10MHz bandwidth. Alternatives like RS321BKXF offer the same package and voltage but have lower speed (1MHz) and require performance verification.