Is there a pin-compatible replacement for RS8411XF?

Several op-amps like LM321H-TR and GS2261-TR share the same SOT23-5 package and a common pinout, making them form-fit compatible. However, significant electrical differences mean they are not drop-in replacements and require engineering validation.

What risks should I check before replacing RS8411XF?

Key risks include: 1) Supply Voltage: ensure the replacement supports your system's voltage. 2) Quiescent Current: a large increase can impact power budgets. 3) Offset Voltage & Bandwidth: changes can affect circuit accuracy and stability. Always verify the pinout.

RS8411XF Alternatives, Datasheet & Cross Reference | NI

RS8411XF is a 36V, 1.2MHz rail-to-rail output CMOS op-amp in a SOT23-5 package. Finding a substitute requires matching its high-voltage capability and low power consumption.

AI replacement insight

Electrical riskhigh

Candidates have major parametric differences in power, precision, or speed.

Package risklow

SOT23-5 is a standard package with a common op-amp pinout, but pinout verification is still needed.

Firmware risklow

Op-amps are analog components and do not involve firmware.

Can it be replaced directly?

No direct drop-in replacement was found. Available alternatives have significant trade-offs in power consumption or precision that require engineering review.

Best replacement path

For performance-critical roles, consider GS2261-TR if power is not a concern. For general use, LM321H-TR is an option but with significant performance degradation. Both require validation.

Main risk

The primary risk is finding a part that matches the target's combination of high supply voltage (36V) and low quiescent current (100uA).

Recommended alternatives

A high-speed, high-precision op-amp with a compatible package, but its very high power consumption is a critical trade-off.

View details

Alternative comparison matrix

Feature / factor	RS8411XF	GS2261-TR	LM321H-TR	Compatibility / risk
Package	SOT23-5	SOT23-5	SOT23-5	SOT23-5 — Same package and pin count.; LM321H-TR: Same package and pin count.
Voltage	0.8mV	0.1mV	5mV	0.1mV / 5mV — Significantly lower offset voltage (better precision).; LM321H-TR: Significantly higher offset voltage.
Current	100µA	2.7mA	250µA	2.7mA / 250µA — Quiescent current is over 25x higher.; LM321H-TR: Higher quiescent current, consumes more power.
Application	1.2MHz	11MHz	1MHz	11MHz — Much higher bandwidth and slew rate.; LM321H-TR: Slightly lower gain-bandwidth product.

Application & sourcing insights

Questions & answers

GS2261-TR offers superior speed and precision but at a much higher power cost. LM321H-TR is parametrically weaker but has a matching supply range. Both require careful review for your specific application.