
UNI-ROYAL
Matches resistance and 0402 package but is a general-purpose part with very wide 5% tolerance.
RT0402BRD07120RL is a high-precision 120 Ohm thin-film resistor. Finding a direct drop-in replacement is difficult as most alternatives are lower-precision thick-film types, requiring careful engineering review.
Substituting a precision resistor with a general-purpose one can affect circuit accuracy and stability.
Candidates share the same 0402 package, ensuring physical compatibility.
No direct drop-in replacements were found. All reviewed candidates are lower-precision thick-film resistors that require significant design validation before use.
Search for thin-film 0402 resistors with 120 Ohm resistance, ≤0.1% tolerance, and ≤25 ppm/°C TCR from other manufacturers.
The primary risk is loss of circuit precision due to higher resistance tolerance and temperature drift (TCR) in substitutes.

UNI-ROYAL
Matches resistance and 0402 package but is a general-purpose part with very wide 5% tolerance.
| Feature / factor | RT0402BRD07120RL | 0402WGJ0121TCE | AC0402FR-07120RL | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 0402 | 0402 | 0402 | 0402 — Form factor matches.; AC0402FR-07120RL: Form factor matches. | |
| Resistance | 120.0 Ohm | 120.0 Ohm | 120.0 Ohm | 120.0 Ohm — Nominal resistance matches.; AC0402FR-07120RL: Nominal resistance matches. | |
| Tolerance | 0.1% | 5.0% | 1.0% | 5.0% / 1.0% — Candidate tolerance is 50x wider.; AC0402FR-07120RL: Candidate tolerance is 10x wider. | |
| Technology | Thin Film | Thick Film | Thick Film | Thick Film — General purpose vs precision technology.; AC0402FR-07120RL: Different resistor technology; impacts precision and noise. | |
| Tcr | 25 ppm/°C | missing | ±100 ppm/°C | missing / ±100 ppm/°C — TCR not specified, expected to be much higher.; AC0402FR-07120RL: Candidate has higher temperature drift. |
The best alternative is another thin-film resistor with 120Ω, 0.1% tolerance, and 25 ppm/°C TCR. While no exact match was found, AC0402FR-07120RL is a functional option if 1% tolerance is acceptable for your application.