
Yageo
Same precision family and package, but with 33Ω resistance. Requires engineering review.
The Yageo RT0402BRD0730RL is a high-precision 30 Ohm thin film chip resistor in a 0402 package, featuring a tight ±0.1% tolerance and a low 25 ppm/°C TCR for stable applications. Finding a direct drop-in replacement requires matching these critical precision parameters.
Target is a precision part; substitutes have different resistance or are lower-grade.
All viable candidates are in the standard 0402 package.
High-precision resistors can have tighter supply than general-purpose ones.
No direct, verified drop-in replacement has been identified. All candidates require engineering review due to parametric differences in resistance, tolerance, or technology.
For precision circuits, find a 30 Ohm, 0.1%, 25 ppm/°C thin film resistor in an 0402 package. If unavailable, the RT0402BRD0733RL is the closest option but requires verifying the impact of its 33 Ohm resistance.
The primary risk is performance degradation from using a part with different resistance, wider tolerance, or higher TCR, especially in precision applications.

Yageo
Same precision family and package, but with 33Ω resistance. Requires engineering review.
| Feature / factor | RT0402BRD0730RL | RT0402BRD0733RL | RC-02K30R0FT | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Resistance | 30 Ohm | 33 Ohm | 30 Ohm | 33 Ohm / 30 Ohm — 10% higher resistance.; RC-02K30R0FT: matched | |
| Tolerance | ±0.1% | ±0.1% | ±1.0% | ±0.1% / ±1.0% — matched; RC-02K30R0FT: Tolerance is 10x wider. | |
| Tcr | 25 ppm/°C | 25 ppm/°C | ±100ppm/℃ | 25 ppm/°C / ±100ppm/℃ — matched; RC-02K30R0FT: TCR is 4x worse. | |
| Technology | Thin Film | Thin Film | Thick Film | Thin Film / Thick Film — matched; RC-02K30R0FT: General purpose vs. precision. | |
| Package | 0402 | 0402 | 0402 | 0402 — matched; RC-02K30R0FT: matched |
Yageo's RT0402BRD0733RL is a close option from the same series with 33 Ohms resistance. For general-purpose use, RC-02K30R0FT offers the same resistance but with relaxed tolerance and TCR. Both require engineering review.