Is there a pin-compatible replacement for RT0402BRD0760K4L?

Yes, all candidates reviewed use the standard 0402 package and are pin-compatible from a physical standpoint. However, their electrical characteristics vary significantly, so they are not all functional drop-in replacements.

What risks should I check before replacing RT0402BRD0760K4L?

The main risks are changes in circuit behavior due to different resistance values, and loss of precision and stability if you use a part with worse tolerance (e.g., 1% vs 0.1%) or a higher TCR (e.g., 100ppm/°C vs 25ppm/°C).

RT0402BRD0760K4L Alternatives, Datasheet & Cross Reference | Yageo

Yageo RT0402BRD0760K4L is a high-precision 60.4kΩ thin-film resistor. Finding a substitute requires careful matching of its tight ±0.1% tolerance and 25 ppm/°C TCR. While pin-compatible options exist, they may differ in resistance or precision, requiring engineering review.

AI replacement insight

Electrical riskhigh

Using a part with incorrect resistance, tolerance, or TCR can cause circuit malfunction, especially in precision analog circuits.

Package risklow

All candidates share the same 0402 package, ensuring physical compatibility on the PCB.

Can it be replaced directly?

No direct drop-in replacement with identical parameters was found among the candidates. The closest options require engineering review due to different resistance values.

Best replacement path

The best replacement path is to select another thin-film resistor from the same Yageo RT series, such as RT0402BRD0762KL (62kΩ), and verify if the slight resistance change is acceptable for the application. Avoid using general-purpose thick film resistors.

Main risk

The primary risk is performance degradation due to using a part with a different resistance value, wider tolerance, or higher temperature coefficient (TCR).

Recommended alternatives

Parametrically similar thin film resistor from the same series, but with a 62kΩ resistance value.

View details

Alternative comparison matrix

Feature / factor	RT0402BRD0760K4L	RT0402BRD0762KL	RT0402BRD0763K4L	RT0402BRE0756K2L	Compatibility / risk
Resistance	60.4 kΩ	62 kΩ	63.4 kΩ	56.2 kΩ	62 kΩ / 63.4 kΩ / 56.2 kΩ — Candidate resistance is 2.6% higher. Verify circuit tolerance.; RT0402BRD0763K4L: Candidate resistance is 5% higher. Verify circuit tolerance.; RT0402BRE0756K2L: Candidate resistance is 7% lower.
Tolerance	±0.1%	±0.1%	±0.1%	±0.1%	±0.1% — matched; RT0402BRD0763K4L: matched; RT0402BRE0756K2L: matched
Tcr	25 ppm/°C	25 ppm/°C	25 ppm/°C	±50 ppm/°C	25 ppm/°C / ±50 ppm/°C — matched; RT0402BRD0763K4L: matched; RT0402BRE0756K2L: TCR is double the target's value, indicating lower stability.
Technology	Thin Film	Thin Film	Thin Film	Thin Film	Thin Film — matched; RT0402BRD0763K4L: matched; RT0402BRE0756K2L: matched
Package	0402	0402	-	-	0402 — matched

Application & sourcing insights

Questions & answers

The best alternative found is Yageo's RT0402BRD0762KL. It matches all precision specs but has a 62kΩ resistance (+2.6% difference), which requires circuit validation. No exact drop-in replacement was identified.