
Yageo
A close parametric match in the same 0603 package, with a slightly higher resistance of 19.6kΩ.
Yageo's RT0603BRD0719K1L is a 19.1 kΩ, 0.1% tolerance, 0603 thin film resistor. This page provides analysis of potential alternatives, focusing on parametric differences in resistance, tolerance, and technology.
All suggested alternatives use the same 0603 package.
Resistance values differ, and some candidates have significantly worse tolerance and TCR.
No direct drop-in replacement with identical 19.1 kΩ resistance was found. However, several parts with nearly identical electrical characteristics and the same 0603 package are available.
For precision applications, alternatives from the same Yageo RT series like RT0603BRD0719K6L offer the closest match, differing only slightly in resistance. For general use, lower-cost RC series parts may be considered with careful review of tolerance and TCR.
The primary risk is the deviation from the target's 19.1 kΩ resistance. For lower-spec alternatives, degraded tolerance (±1% vs ±0.1%) and TCR (100ppm vs 25ppm) are critical concerns.

Yageo
A close parametric match in the same 0603 package, with a slightly higher resistance of 19.6kΩ.
| Feature / factor | RT0603BRD0719K1L | RT0603BRD0719K6L | RC0603FR-0719K6L | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Resistance | 19.1 kΩ | 19.6 kΩ | 19.6 kΩ | 19.6 kΩ — Candidate resistance is 2.6% higher.; RC0603FR-0719K6L: Resistance is 2.6% higher. | |
| Tolerance | ±0.1% | ±0.1% | ±1% | ±0.1% / ±1% — matched; RC0603FR-0719K6L: Candidate has 10x wider tolerance. | |
| Tcr | 25 ppm/°C | 25 ppm/°C | ±100 ppm/°C | 25 ppm/°C / ±100 ppm/°C — matched; RC0603FR-0719K6L: Candidate has 4x worse temperature stability. | |
| Technology | Thin Film | Thin Film | Thick Film | Thin Film / Thick Film — matched; RC0603FR-0719K6L: Candidate is a lower-cost thick film resistor. | |
| Package | 0603 | 0603 | 0603 | 0603 — matched; RC0603FR-0719K6L: matched |
The best alternatives are other Yageo RT series resistors like RT0603BRD0719K6L. They share the same package, tolerance, and TCR, with only a minor difference in resistance value that must be verified for your application.