
Yageo
Parametric alternative with lower resistance (-6.9%). All other key specs match.
Yageo RT0603BRD0786K6L is a 86.6kΩ, ±0.1%, 1/10W thin film chip resistor in a 0603 package. Parametric alternatives from the same Yageo RT series are available but require review due to different resistance values.
Resistance value differs, which could impact circuit timing, gain, or accuracy.
All viable candidates share the same 0603 package and footprint.
Candidates are from the same manufacturer and product series, suggesting similar availability.
No direct drop-in replacement with identical resistance was found. All suggested alternatives are from the same product family but have different resistance values, requiring engineering review.
Use a part from the same Yageo RT series, like RT0603BRD0788K7L, after verifying the resistance deviation is acceptable for the application.
The change in resistance value may alter circuit performance, especially in precision analog circuits.

Yageo
Parametric alternative with lower resistance (-6.9%). All other key specs match.
| Feature / factor | RT0603BRD0786K6L | RT0603BRD0780K6L | RT0603BRD0782K5L | RT0603BRD0788K7L | Compatibility / risk |
|---|---|---|---|---|---|
| Resistance | 86.6kΩ | 80.6kΩ | 82.5kΩ | 88.7kΩ | 80.6kΩ / 82.5kΩ / 88.7kΩ / 90.9kΩ — -6.9% deviation from target; RT0603BRD0782K5L: -4.7% deviation from target; RT0603BRD0788K7L: +2.4% deviation from target; RT0603BRD0790K9L: +5.0% deviation from target |
| Tolerance | ±0.1% | ±0.1% | ±0.1% | ±0.1% | ±0.1% — matched; RT0603BRD0782K5L: matched; RT0603BRD0788K7L: matched; RT0603BRD0790K9L: matched |
| Power | 1/10W | 1/10W | 1/10W | 1/10W | 1/10W — matched; RT0603BRD0782K5L: matched; RT0603BRD0788K7L: matched; RT0603BRD0790K9L: matched |
| Package | 0603 | 0603 | 0603 | 0603 | 0603 — matched; RT0603BRD0782K5L: matched; RT0603BRD0788K7L: matched; RT0603BRD0790K9L: matched |
| Tcr | 25 ppm/°C | - | - | 25 ppm/°C | 25 ppm/°C — matched |
RT0603BRD0788K7L is the closest alternative with 88.7kΩ resistance (+2.4% difference). All key parameters like package, power, tolerance, and TCR match, but the resistance change must be validated for your application.