RT0805BRE07130KL
Yageo
Needs validationmedium risk
A parametric alternative in the same 0805 package with a slightly higher resistance and weaker temperature coefficient (TCR).
Best Alternatives to RT0805BRD07120KL
Finding a substitute for the Yageo RT0805BRD07120KL, a 120 kΩ 0.1% 25 ppm/°C thin film resistor, requires careful matching of precision parameters. Alternatives exist but may involve trade-offs in stability or tolerance.
AI replacement insight
Electrical riskhigh
Target is a precision part; substitutes have weaker TCR, tolerance, or technology.
Package risklow
0805 is a standard package with many pin-compatible options.
Can it be replaced directly?
No direct drop-in replacement is identified without trade-offs. All candidates require review of key parametric differences, especially TCR and tolerance.
Best replacement path
Prioritize thin film resistors in the 0805 package with ±0.1% tolerance and TCR ≤ 25 ppm/°C. If unavailable, a parametric alternative with a slightly higher TCR may be acceptable after review.
Main risk
The main risk is performance degradation from using a substitute with a higher TCR or wider tolerance, impacting circuit accuracy and stability.
Recommended alternatives
3Alternative comparison matrix
| Feature / factor | RT0805BRD07120KL | RT0805BRE07130KL | FRC0805F1213TS | RC0805FR-07130KL | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 0805 | 0805 | 0805 | 0805 | 0805 — Standard 0805 package matches target.; FRC0805F1213TS: Standard 0805 package matches target.; RC0805FR-07130KL: Standard 0805 package matches target. |
| Resistance | 120 kΩ | 130 kΩ | 121 kΩ | 130 kΩ | 130 kΩ / 121 kΩ — Resistance is 8.3% higher than target.; FRC0805F1213TS: Resistance value is a very close match (<1% difference).; RC0805FR-07130KL: Resistance is 8.3% higher than target. |
| Tolerance | ±0.1% | ±0.1% | ±1% | ±1% | ±0.1% / ±1% — Precision tolerance matches target.; FRC0805F1213TS: Significant downgrade from 0.1%. Uses Thick Film vs target's Thin Film.; RC0805FR-07130KL: Significant downgrade from precision 0.1%. Uses Thick Film vs target's Thin Film. |
| Tcr | 25 ppm/°C | ±50 ppm/°C | ±100 ppm/°C | ±100 ppm/°C | ±50 ppm/°C / ±100 ppm/°C — Temperature coefficient is double the target's, indicating lower stability.; FRC0805F1213TS: Much higher TCR indicates poor temperature stability compared to target.; RC0805FR-07130KL: Much higher TCR indicates poor temperature stability compared to target. |
| Power | 1/8 W | 1/8 W | - | - | 1/8 W — Power rating is identical. |
Application & sourcing insights
Questions & answers
The best alternative depends on application needs. For similar precision, look for thin film resistors with 0.1% tolerance and low TCR. For general use, thick film resistors may suffice if the circuit allows.