
Yageo
A form-fit alternative with the same resistance and tolerance, but a higher temperature coefficient (TCR).
Find and compare alternatives for the Yageo RT0805BRD0712KL, a 12kΩ 0.1% 25ppm thin film resistor. Review parametric differences like resistance and TCR before substitution.
Resistance or TCR mismatches require circuit validation.
All candidates share the same 0805 package.
No direct pin-to-pin replacement was found. All candidates have parametric differences in resistance or temperature coefficient (TCR).
Parametric alternatives with slightly different resistance values (e.g., RT0805BRD0712K4L at 12.4kΩ) are the closest options.
The primary risk is substituting a part with a different resistance value or a higher TCR, which can affect circuit accuracy and stability.

Yageo
A form-fit alternative with the same resistance and tolerance, but a higher temperature coefficient (TCR).
| Feature / factor | RT0805BRD0712KL | RT0805BRE0712KL | RT0805BRD0712K4L | AC0805FR-0712KL | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 0805 | 0805 | 0805 | 0805 | 0805 — Same package and pin count.; RT0805BRD0712K4L: Same package and pin count.; AC0805FR-0712KL: Same package and pin count. |
| Resistance | 12kΩ | 12kΩ | 12.4kΩ | - | 12kΩ / 12.4kΩ — Resistance value matches.; RT0805BRD0712K4L: Resistance is 3.3% higher. |
| Tolerance | ±0.1% | ±0.1% | ±0.1% | ±1% | ±0.1% / ±1% — Tolerance matches.; RT0805BRD0712K4L: Tolerance matches.; AC0805FR-0712KL: Tolerance is significantly wider. |
| Tcr | 25 ppm/°C | 50 ppm/°C | 25 ppm/°C | ±100 ppm/°C | 50 ppm/°C / 25 ppm/°C / ±100 ppm/°C — Candidate TCR is higher (worse).; RT0805BRD0712K4L: TCR matches.; AC0805FR-0712KL: TCR is significantly higher (worse). |
| Technology | Thin Film | Thin Film | - | Thick Film | Thin Film / Thick Film — Technology matches.; AC0805FR-0712KL: Different, lower-precision technology. |
The best alternatives are other Yageo RT series resistors like RT0805BRD0712K4L (12.4kΩ) or RT0805BRD0711KL (11kΩ), which match key specs but have slightly different resistance values. Always verify circuit impact.