Is there a pin-compatible replacement for RT0805BRD0713KL?

Yes, several parts like RT0805BRD0713K3L share the same 0805 package and 2-pin layout. While they are form-fit compatible, you must review electrical parameters like resistance to ensure they function correctly in your circuit.

What risks should I check before replacing RT0805BRD0713KL?

The main risks are changes in resistance, tolerance, and Temperature Coefficient (TCR). The target is a high-precision part (0.1%, 25ppm). Using a part with higher tolerance (e.g., 1%) or TCR will reduce circuit accuracy and stability.

RT0805BRD0713KL Alternatives, Datasheet & Cross Reference | Yageo

Find and compare alternatives for the Yageo RT0805BRD0713KL, a 13kΩ 0.1% 25ppm thin-film resistor in an 0805 package. Explore parametrically similar options and understand the trade-offs for your design.

AI replacement insight

Electrical riskmedium

Resistance value must be within circuit tolerance. Using a lower-spec part (worse tolerance/TCR) is a high electrical risk.

Package risklow

All candidates use the standard 0805 package.

Firmware risklow

Not applicable for a passive resistor.

Can it be replaced directly?

No exact direct replacement is listed, but RT0805BRD0713K3L is functionally very close, differing only by a +2.3% resistance value. It is a strong candidate for most applications.

Best replacement path

Prioritize candidates with matching thin-film technology, ±0.1% tolerance, and ≤25ppm/°C TCR. The closest resistance value, like RT0805BRD0713K3L (13.3kΩ), is the top choice.

Main risk

The primary risk is substituting with a lower-precision resistor (e.g., thick film, >0.1% tolerance), which can compromise the performance and stability of precision analog circuits, filters, or voltage dividers.

Recommended alternatives

Alternative with identical precision specs but a lower resistance of 12.4kΩ, a -4.6% deviation.

View details

Alternative comparison matrix

Feature / factor	RT0805BRD0713KL	RT0805BRD0712K4L	RT0805BRD0713K3L	Compatibility / risk
Resistance	13 kΩ	12.4 kΩ	13.3 kΩ	12.4 kΩ / 13.3 kΩ — -4.6% deviation; RT0805BRD0713K3L: +2.3% deviation
Tolerance	±0.1%	±0.1%	±0.1%	±0.1% — matched; RT0805BRD0713K3L: Matches precision requirement
Tcr	25 ppm/°C	25 ppm/°C	25 ppm/°C	25 ppm/°C — matched; RT0805BRD0713K3L: Matches precision requirement
Package	0805	0805	0805	0805 — matched; RT0805BRD0713K3L: matched
Technology	Thin Film	-	Thin Film	Thin Film — matched

Application & sourcing insights

Questions & answers

RT0805BRD0713K3L is a strong alternative. It shares the same 0.1% tolerance, 25ppm/°C TCR, and thin-film technology, with a very close resistance of 13.3kΩ. Always verify circuit tolerance for this minor difference.