
UNI ROYAL
A potential pin-compatible 1.5MΩ, 1% resistor in a 1206 package; requires engineering review of power rating and TCR.
Find and compare replacements for the RALEC RTT061504FTP, a 1.5MΩ, 1%, 0.25W resistor in a 1206 package. Review pin-compatible and parametric alternatives from other manufacturers.
Power rating and TCR must be verified for the application.
Standard 1206 package is highly interchangeable.
This is a common value resistor with multiple sources.
Direct replacement for RTT061504FTP should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
Start with Datasheet verified or Strong match candidates for RTT061504FTP, then review parametric alternatives for package and electrical fit.
The primary risk is ensuring the substitute's power rating and temperature coefficient (TCR) are sufficient for the specific circuit, as these can vary between manufacturers.

UNI ROYAL
A potential pin-compatible 1.5MΩ, 1% resistor in a 1206 package; requires engineering review of power rating and TCR.
| Feature / factor | RTT061504FTP | 1206W4F1504T5E | FRC1206J155 TS | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 1206 | 1206 | 1206 | 1206 — Matches target package size.; FRC1206J155 TS: Matches target package size. | |
| Resistance | 1.5MΩ | 1.5MΩ | 1.5MΩ | 1.5MΩ — Identical resistance value.; FRC1206J155 TS: Identical resistance value. | |
| Tolerance | ±1% | ±1% | ±5% | ±1% / ±5% — Matches target precision.; FRC1206J155 TS: Wider tolerance, may not be suitable for precision circuits. | |
| Power | 0.25W | 0.25W | 0.25W | 0.25W — Matches target power, but review against application's safety margin is advised.; FRC1206J155 TS: Matches target power rating. | |
| Tcr | ±100 ppm/°C | Unknown | ±100 ppm/°C | Unknown / ±100 ppm/°C — Datasheet suggests ±100 ppm/°C, but requires verification.; FRC1206J155 TS: Matches target temperature coefficient. |
Verified drop-in options for RTT061504FTP are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.