CK1V470M-CRE54
Fujicon Elec
Needs validationmedium risk
A form-fit match with higher voltage, but lower ripple current requires engineering review.
Best Alternatives to RVE47UF25V67RV0069
Finding a substitute for the KNSCHA RVE47UF25V67RV0069 requires careful attention to its low-impedance characteristics. This 47µF, 25V capacitor is designed for high ripple current (230mA), a critical spec that most alternatives do not meet.
AI replacement insight
Electrical riskhigh
All candidates have much lower ripple current ratings.
Package risklow
Most candidates match the package, but one has a different height.
Can it be replaced directly?
No, there are no direct drop-in replacements among the candidates. All have a significantly lower ripple current rating than the target's 230mA, which is critical for its low-impedance function.
Best replacement path
Review the application's true ripple current needs. If a lower rating is acceptable, CK1V470M-CRE54 offers a voltage upgrade in the same package. Otherwise, a new search for low-ESR capacitors is required.
Main risk
Using a substitute with a lower ripple current rating can cause capacitor overheating, reduced lifespan, and circuit instability or failure.
Recommended alternatives
5Alternative comparison matrix
| Feature / factor | RVE47UF25V67RV0069 | CK1V470M-CRE54 | VZT470M1VTR-0506 | CE1E476M4S5NTA0VRJ0 | Compatibility / risk |
|---|---|---|---|---|---|
| Capacitance | 47µF | 47µF | 47µF | 47µF | 47µF — matched; VZT470M1VTR-0506: matched; CE1E476M4S5NTA0VRJ0: matched; RVT1E470M0605: matched |
| Voltage | 25V | 35V | 35V | 25V | 35V / 25V — Higher voltage is a safe upgrade.; VZT470M1VTR-0506: Higher voltage is a safe upgrade.; CE1E476M4S5NTA0VRJ0: matched; RVT1E470M0605: matched |
| Ripple Current | 230mA | 115mA (est.) | 130mA (est.) | 49mA | 115mA (est.) / 130mA (est.) / 49mA — Lower than target's 230mA. Value estimated from datasheet.; VZT470M1VTR-0506: Lower than target's 230mA. Value estimated from datasheet.; CE1E476M4S5NTA0VRJ0: Significantly lower than target's low-impedance spec.; RVT1E470M0605: Significantly lower than target's low-impedance spec. |
| Package | SMD, 6.3mm x 5.4mm | SMD, 6.3mm x 5.4mm | SMD | SMD, 6.3mm x 5.4mm | SMD, 6.3mm x 5.4mm — matched; VZT470M1VTR-0506: Package height differs (5.8mm vs 5.4mm).; CE1E476M4S5NTA0VRJ0: matched; RVT1E470M0605: matched |
Application & sourcing insights
Questions & answers
No direct drop-in replacement was found. The best potential candidate is CK1V470M-CRE54, which has a matching package and higher voltage, but you must verify if its lower ripple current (~115mA vs 230mA) is acceptable for your application.