Is there a pin-compatible replacement for SFE3015A-100M-F-HF?

Several inductors like the TDK VLS3012CX-100M-1 and Chilisin LVS303012H-100M-N share the same 3x3mm package and 2-pin layout, but have critical electrical differences. A direct 'drop-in' replacement is not guaranteed without engineering review.

What risks should I check before replacing SFE3015A-100M-F-HF?

Key risks include: 1) Saturation Current (Isat) being too low, causing circuit failure. 2) Operating Temperature range being too narrow. 3) DC Resistance (DCR) being too high, reducing efficiency and increasing heat.

SFE3015A-100M-F-HF Alternatives, Datasheet & Cross Reference | LEDdynamics, Inc.

Finding a substitute for the SFE3015A-100M-F-HF 10µH inductor requires careful review of electrical parameters. While several parts share the 3030 package, key differences in current ratings, resistance, and temperature range exist.

AI replacement insight

Package risklow

Several candidates match the 3x3mm footprint.

Electrical riskhigh

Candidates have weaker temperature range, higher DCR, or lower saturation current.

Can it be replaced directly?

No direct drop-in replacement has been identified. All form-fit candidates have significant electrical trade-offs requiring engineering review.

Best replacement path

TDK's VLS3012CX-100M-1 is a strong candidate if the application's maximum operating temperature is below 105°C.

Main risk

Electrical parameter mismatch, particularly saturation current, DC resistance, and operating temperature range.

Recommended alternatives

A form-fit match with higher current ratings, but a narrower operating temperature range.

View details

Alternative comparison matrix

Feature / factor	SFE3015A-100M-F-HF	VLS3012CX-100M-1	LVS303012H-100M-N	Compatibility / risk
Package	3030 (Metric 3030)	3030 (1212 Metric)	3030	3030 (1212 Metric) — Package size 3.0x3.0x1.2mm matches target footprint.; LVS303012H-100M-N: Package size 3.0x3.0mm matches target footprint.
Saturation Current A	0.92A	1.0A	0.72A	1.0A / 0.72A — Higher saturation current provides more margin.; LVS303012H-100M-N: Lower saturation current poses a critical risk of failure.
Current A	0.8A	1.0A	1.0A	1.0A — Higher RMS current rating.; LVS303012H-100M-N: Higher RMS current rating.
Dcr Ohm	0.27Ω	0.324Ω	0.27Ω	0.324Ω / 0.27Ω — Slightly higher DCR may reduce efficiency.; LVS303012H-100M-N: Matches typical DCR for similar efficiency.
Temperature	-40 to +125°C	-40 to +105°C	-40°C to 125°C	-40 to +105°C / -40°C to 125°C — Narrower temperature range is a key limitation.; LVS303012H-100M-N: Matches operating temperature range.

Application & sourcing insights

Questions & answers

TDK's VLS3012CX-100M-1 is a strong candidate with a matching package and higher current ratings, but its lower maximum temperature of 105°C must be acceptable for your application.