
Sunlord
Alternative in a similar package with matching current, but has higher DCR and a reduced temperature range.
The Sunltech SLO0530H3R3MTT is a 3.3µH shielded power inductor for DC-DC converters. Finding a replacement requires careful matching of inductance, current ratings, DCR, and physical package size.
Footprints may differ slightly even with similar case sizes.
Higher DCR can reduce efficiency; narrower temperature range is a critical concern.
Direct replacement for SLO0530H3R3MTT should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
The best path is to evaluate MWSA0503S-3R3MT, which has a similar package, but requires careful analysis of its higher DCR and narrower temperature range.
The primary risk is the narrower operating temperature range of most alternatives, which could cause failures in high-temperature environments.

Sunlord
Alternative in a similar package with matching current, but has higher DCR and a reduced temperature range.
| Feature / factor | SLO0530H3R3MTT | MWSA0503S-3R3MT | MWSA0603S-3R3MT | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Inductance | 3.3 µH | 3.3 µH | 3.3 µH | 3.3 µH — Inductance matches.; MWSA0603S-3R3MT: Inductance matches. | |
| Package | 5.4mm x 5.2mm | 5.2mm x 5.4mm | 6.6mm x 7.0mm | 5.2mm x 5.4mm / 6.6mm x 7.0mm — Package dimensions are very similar, likely compatible.; MWSA0603S-3R3MT: Candidate package is significantly larger. | |
| Current | 5.0 A | 5.0 A | 9.5 A | 5.0 A / 9.5 A — Heat rating current (Irms) matches.; MWSA0603S-3R3MT: Higher saturation current (Isat). | |
| Dcr | 28 mΩ | 38 mΩ | 22 mΩ | 38 mΩ / 22 mΩ — Higher DCR may reduce efficiency.; MWSA0603S-3R3MT: Lower DCR improves efficiency. | |
| Temperature | -55°C to +150°C | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C — Narrower operating temperature range.; MWSA0603S-3R3MT: Narrower operating temperature range. |
Verified drop-in options for SLO0530H3R3MTT are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.