Is there a pin-compatible replacement for SLS6D38S100MTT?

No pin-to-pin compatible replacement has been identified. All reviewed candidates have different package footprints or critical electrical trade-offs, requiring careful verification of the PCB layout and circuit performance.

What risks should I check before replacing SLS6D38S100MTT?

Key risks include: 1) Package Mismatch: Verify the candidate's footprint and height fit your PCB. 2) DC Resistance (DCR): A higher DCR increases power loss and heat. 3) Saturation Current (Isat): Ensure the replacement's Isat meets your application's peak current.

SLS6D38S100MTT Alternatives, Datasheet & Cross Reference | Sunltech

Finding a replacement for the Sunltech SLS6D38S100MTT 10µH inductor requires careful review of electrical and physical specifications. While alternatives exist, key differences in current ratings, DC resistance (DCR), and package size must be considered.

AI replacement insight

Package riskhigh

No candidates share the exact same package dimensions, requiring layout verification or redesign.

Electrical riskmedium

Candidates have different DCR and current ratings that must be validated for the application.

Sourcing risklow

Multiple vendors offer 10uH power inductors, but finding a form-fit match is difficult.

Can it be replaced directly?

No direct drop-in replacement has been identified among the candidates reviewed.

Best replacement path

Functional alternate requiring board redesign or careful validation.

Main risk

Physical incompatibility (package size) is the primary risk, followed by electrical performance changes (DCR).

Recommended alternatives

An electrical upgrade with higher current ratings, but requires board redesign due to a larger package.

View details

Alternative comparison matrix

Feature / factor	SLS6D38S100MTT	FCH0650-100M	SLO0630H100MTT	Compatibility / risk
Inductance	10 µH	10 µH	10 µH	10 µH — Inductance matches target.; SLO0630H100MTT: Inductance matches target.
Current	Unknown	6.5 A	4.0 A	6.5 A / 4.0 A — Higher saturation current provides more margin.; SLO0630H100MTT: Higher rated current is an upgrade.
Resistance	38 mΩ	40.4 mΩ	66 mΩ	40.4 mΩ / 66 mΩ — Slightly higher DCR may increase losses.; SLO0630H100MTT: Significantly higher DCR will reduce efficiency and increase heat.
Package	~6.6x6.6x4.0mm	7.5x6.8x5.0mm	7.1x6.6x3.0mm	7.5x6.8x5.0mm / 7.1x6.6x3.0mm — Larger footprint and height requires PCB redesign.; SLO0630H100MTT: Slightly different footprint may fit some pads. Lower profile is a benefit.

Application & sourcing insights

Questions & answers

No direct drop-in replacement is available. FCH0650-100M offers superior current handling but requires a different PCB layout. Other options have performance trade-offs like higher DCR. A full engineering review is essential.