Is there a pin-compatible replacement for SM06B-GHS-TB(LF)(SN)?

Currently, no substitutes are verified as 100% pin-compatible without manual review. Several candidates have the same pin count, pitch, and mounting style (SMT, right-angle), but their PCB footprint must be confirmed by comparing the manufacturer's datasheet with your board layout.

What risks should I check before replacing SM06B-GHS-TB(LF)(SN)?

The main risks are mechanical. First, verify the PCB footprint is identical. Second, check the connector's housing dimensions to ensure it fits in your enclosure. Finally, confirm that the substitute will correctly mate with your existing cable-side connector, as different series (e.g., JST GH vs. Molex PicoBlade) are not cross-compatible.

SM06B-GHS-TB(LF)(SN) Alternatives, Datasheet & Cross Reference | JST

SM06B-GHS-TB(LF)(SN) is a popular 6-position, 1.25mm pitch, right-angle SMT header from JST. This page analyzes potential alternatives, focusing on critical mechanical and electrical parameters to guide your selection process.

AI replacement insight

Package riskhigh

PCB footprint and housing dimensions must be identical. Even minor differences can prevent assembly.

Electrical risklow

The target's 50V/1A rating is common, and many alternatives meet or exceed these specs.

Sourcing riskhigh

Substituting with a different connector series (e.g., PicoBlade for GH) will require changing the mating connector as well, impacting the entire supply chain.

Can it be replaced directly?

No verified direct drop-in replacement has been identified. Candidates like WAFER-MX1.25-6PWB exist but require careful mechanical verification by an engineer.

Best replacement path

Find a 6-pin, 1.25mm pitch, SMT, right-angle header with a verified matching footprint from its datasheet.

Main risk

The primary risk is mechanical incompatibility. An incorrect substitute may not fit the PCB layout or may not connect with the mating cable assembly.

Recommended alternatives

A 6-pin, 1.25mm pitch SMT right-angle header with a higher voltage rating; requires mechanical verification.

View details

Alternative comparison matrix

Feature / factor	SM06B-GHS-TB(LF)(SN)	WAFER-MX1.25-6PWB	HC-1.25-6PWT	Compatibility / risk
Package	Surface Mount (SMT), Side-Entry	Surface Mount (SMT), Right-Angle	Surface Mount (SMT), Right-Angle	Surface Mount (SMT), Right-Angle — Form factor matches, but exact footprint and housing dimensions require datasheet verification.; HC-1.25-6PWT: Form factor matches, but footprint and housing dimensions require datasheet verification.
Voltage	50V	125V	250V	125V / 250V — Higher voltage rating provides more margin.; HC-1.25-6PWT: Significantly higher voltage rating.
Current	1.0A	1.0A	2A	1.0A / 2A — matched; HC-1.25-6PWT: Higher current rating offers more thermal headroom.
Pinout	JST GH Series Footprint	Unknown	-	Unknown — PCB layout compatibility must be confirmed by comparing datasheet drawings.
Interface	JST GH Series	-	PicoBlade style	PicoBlade style — May not be compatible with target's GH series mating connectors. This is a critical check.

Application & sourcing insights

Questions & answers

The best potential alternatives, such as WAFER-MX1.25-6PWB, match the key electrical and mechanical form-factor specs. However, you must verify the mechanical drawings in the datasheet to ensure the PCB footprint and housing dimensions are a perfect match before ordering.