Needs validationmedium risk
From the same series with a matching footprint but lower profile, higher DCR, and slightly reduced current rating.
Best Alternatives to SMMS0650-100M
Finding a substitute for the SMMS0650-100M 10µH power inductor involves balancing package compatibility with electrical performance. While no direct drop-in is confirmed, several form-fit alternatives exist with trade-offs in efficiency and thermal ratings.
AI replacement insight
Electrical riskmedium
Most alternatives have higher DCR or lower current ratings, impacting efficiency and thermal management.
Package riskmedium
Many candidates have a similar footprint but different height, which could affect mechanical fit and airflow.
Sourcing risklow
Multiple vendors offer parts in this category, providing sourcing flexibility.
Can it be replaced directly?
No direct, drop-in replacement has been identified. Several candidates offer a similar footprint but differ in height and electrical performance, requiring engineering review.
Best replacement path
SMMS0630-100M is the most promising path, being from the same manufacturer series with a matching footprint. However, its lower height and weaker thermal performance (higher DCR, lower Irms) must be validated in the application.
Main risk
The primary risk is thermal performance. Most alternatives have higher DCR or lower current ratings, which can lead to increased heat and potential failure if not properly evaluated.
Recommended alternatives
4Alternative comparison matrix
| Feature / factor | SMMS0650-100M | SMMS0630-100M | PSPMAA0805-100M-ANP | MWSA0603S-100MT | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 7.1x6.6x5.0mm | 7.1x6.6x3.0mm | 8.0x8.5mm | 6.6x7.0x3.0mm | 7.1x6.6x3.0mm / 8.0x8.5mm / 6.6x7.0x3.0mm / 7.0x6.6x3.0mm — Footprint matches, but height is 2mm lower.; PSPMAA0805-100M-ANP: Larger package requires PCB redesign.; MWSA0603S-100MT: Similar footprint, but lower height. Verify land pattern.; CYA0630-10UH: Similar footprint, but lower height. Verify land pattern. |
| Inductance | 10µH | 10µH | 10µH | 10µH | 10µH — matched; PSPMAA0805-100M-ANP: matched; MWSA0603S-100MT: matched |
| Saturation Current A | 5.5A | 5.5A | 10A | - | 5.5A / 10A — matched; PSPMAA0805-100M-ANP: stronger |
| Current A | 4.7A | 4.5A | 6A | 4.5A-5.0A | 4.5A / 6A / 4.5A-5.0A / 4.0A — Slightly lower temp. rise current.; PSPMAA0805-100M-ANP: stronger; MWSA0603S-100MT: Temp. rise current is comparable.; CYA0630-10UH: Lower temp. rise current. |
| Dcr Ohm | 48mΩ | 64.5mΩ | 30mΩ | 68mΩ | 64.5mΩ / 30mΩ / 68mΩ / 76mΩ — Higher DCR will increase power loss.; PSPMAA0805-100M-ANP: Lower DCR improves efficiency.; MWSA0603S-100MT: Higher DCR will increase power loss.; CYA0630-10UH: Significantly higher DCR increases power loss. |
Application & sourcing insights
Questions & answers
The best alternative is likely SMMS0630-100M, as it's from the same series with a matching footprint. However, you must verify if its lower height (3mm vs 5mm), higher DCR, and slightly lower current rating are acceptable for your design.