What risks should I check before replacing SRV05-4A?

Before replacing SRV05-4A, you must verify three key risks: 1) Pinout: Ensure the pin configuration matches exactly. 2) Capacitance: The target has very low capacitance (0.5pF); a higher value could disrupt high-speed signals. 3) Peak Pulse Current: The replacement must handle at least 4.0A to provide equivalent protection.

SRV05-4A Alternatives, Datasheet & Cross Reference | SMC(Sangdest Microelectronic (Nanjing))

SRV05-4A is a 5V, 4-channel uni-directional TVS diode array in a SOT-23-6L package, notable for its ultra-low 0.5pF capacitance. It is designed to protect high-speed data lines from ESD events.

AI replacement insight

Electrical riskmedium

Capacitance mismatch is the main electrical risk. Peak current and clamping voltage must also be checked.

Package risklow

Most candidates use the same SOT-23-6L package, but pinout must be confirmed from datasheets.

Can it be replaced directly?

Direct replacement for SRV05-4A should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.

Best replacement path

The SRV05-4 from other manufacturers is the most promising path, as it shares a base part number. However, it requires verifying the peak pulse current from a datasheet. If higher capacitance is acceptable, RLST236A054LV is a well-defined alternative.

Main risk

The primary risk is an increase in capacitance, which can degrade signal integrity in high-speed communication lines like USB or Ethernet.

Recommended alternatives

A likely cross-vendor alternative with a matching package and potentially better capacitance.

View details

Alternative comparison matrix

Feature / factor	SRV05-4A	SRV05-4	RLST236A054LV	Compatibility / risk
Package	SOT-23-6L	SOT-23-6L	SOT-23-6L	SOT-23-6L — Package matches, increasing likelihood of fit.; RLST236A054LV: Package matches.
Voltage	5.0V	5.0V	5.0V	5.0V — Working voltage matches.; RLST236A054LV: Working voltage matches.
Capacitance	0.5pF	0.4pF (from ES data)	1.5pF	0.4pF (from ES data) / 1.5pF — Capacitance is lower, which is better for high-speed signals.; RLST236A054LV: Higher capacitance may impact high-speed signal integrity.
Current	4.0A	Not specified in artifact	4.0A	Not specified in artifact / 4.0A — Peak pulse current rating is missing and must be verified from datasheet.; RLST236A054LV: Peak pulse current matches.
Polarity	Uni-directional	Assumed uni-directional	Unidirectional	Assumed uni-directional / Unidirectional — Polarity is assumed from part number, must be verified.; RLST236A054LV: Polarity matches.

Application & sourcing insights

Questions & answers

Verified drop-in options for SRV05-4A are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.